transfer

Looking for an early model transfer case shifter retainer and shaft (PN: 36344-60021), the pic should show exactly what I am looking for, it's needed for the LT swap kit I have from @torfab Any questions please let me know. Thanks.

The vehicle is a 1997 FZJ80 with an HF2F installed as a replacement for the HF2AV. I did this about 10 years ago, I have a vague memory the drive shafts were different lengths. Due to a maintenace brain fault, I neglected to grease the splines (yes !! I neglected to do that. ) and now the shaft...

Offering up the transfer case off of my 100. It is more than likely in need of a rebuild. The front puts out shaft studs are stripped and need replacing. The case leaks at the front output flange as well. Great for someone who wants to re-gear without having much downtime. Can ship at buyers...

Guys, I have a 04 LC FSM and below is what I extracted from it. Doing the diff and transfer case oil service in few days. Hopefully torque specs are good for 06 as well. But let me know. Transfer Case Protector - 3 Bolts - Torque: 28 N·m 75W-90 (Mobile 1 Synthetic) 1.3 Liters - 1.4 US Qts...

I am out of town so have to go off pics can someone identify if this is a 3 or 4 speed transfer case thanks

New, never installed. Custom exhaust interferes with frame rail mount. Shame as this thing is stout. $136 + shipping.

Hi guys have a Hzj75. Recently noticed a oil seep on my transfer case and I could see the seal is seeping. I noticed that it has a little bit of up and down play. I have compared it to another one and my play is definitely alot more. I was wondering what causes this play. The washer is there as...

With a very long list of things to do on my project this is something I have not got around to dealing with yet but I have some questions. First my set up: 1973 FJ with a 350 Chevy with a SM420 truck transmission, first gear being compound low. The transfer case is two speed, 2H and 4H, there...

Out of my 1981 with 109k miles. Asking $600 picked up at 11787

I've got a 1991 FJ80 that needs a transfer case. I am starting to think The Amish Electrician keeps the HF2A transfer cases with the hen's teeth. I'm wondering if there is anything I need to know about fitment. Is there any difference in the transfer case depending upon engine? This one...

Came out of a 1998 Lexus LX470 with 411,000 miles on it (at time of removal). The case had been filled with ATF and the gears are so worn out that they vibrate above speeds of 45 mph. Good candidate for a regear or rebuild. Plenty of good spare parts Asking $200 willing to negotiate

Lever was getting impossible to move, using a 500mm socket extension on the lever was still a big effort, rebuild time. Seems like a common problem on most part time 80 & 7X's with the HF1A, couldn't find any threads about rebuilds for part time levers. Don't have photo's of everything but it's...

25.00 plus shipping.

Toyota dealer can’t get the studs in for over a week (part 9011411003). Searching rock auto and the oreillys website yields zero results, but does anyone happen to know a Dorman or other aftermarket part number for the output flange studs? Thanks!

Have nice boots for the parking brake and transfer case shifter removed from a 96 80 series. Great shape, $35 for the PK boot and $35 for the transfer boot. Buyer pays shipping. Best to email me shmukter@pa.metrocast.net

Hi everyone! I have a 99' land cruiser, and live at the bottom of one of the steepest roads in america. The other day, I was driving up the hill when the transfer case failed (sudden grinding sound, can't put in gear in either high or low). I managed to back it down the hill to a safe flat...

I pulled my TC out, due to the front loosing tension and causing clunk and jerk. Actuator and other sensor are sill good. Mileage is around 182k. Prefer local pick up or I can meet at resonable distance.

Help! So, I recently discovered a minor leak in my KZJ78 transfer case, and I was able to pinpoint it to the small oil seal at the top of the transfer case where the shifter linkage goes into the transfer case. I managed to disconnect the bellcrank linkage from the selector shaft that...

Looking for a good used FZJ80/LX450 CDL

Good afternoon everyone, I recently purchased a 2002 Land Cruiser that had great service records, and was well maintained (or at least I thought so.) I'm has 225k miles on it, and runs well. I was looking over some service records, and found the original owners phone number, so I reached out to...