pipe

I have a master cylinder/booster with a brake proportioning valve as per the first picture in this thread. If you have a 1987-89 non-US 60 series with front disc brakes and no rear load-sensing proportioning valve, could you please tell me which output from the proportioning valve goes to the...

One of my preventative maintenance items is the thermostat, and while I've got coolant drained, figured I'd replace the three o-rings in the water bypass pipe (16351-66010 Outlet Water By-Pass Pipe). The pipe is snug in the housing and I don't want to mar it by prying it with Knipex pliers or...

Help please. How do I remove top bolt on bottom end of EGR pipe? I was up until past 2am messing around trying to get this and am stumped. I just need to get enough leverage to crack it loose. I got the bottom bolt out with some long extensions from the wheel well with the tire out. I just...

I`m looking for a Air intake Pipe without EGR for my LC 78 rebuild with a 1HD-FT 24V Engine The partnumber from Toyota: Pipe, Intake 17113-17040 This Part was normali installed in a HDJ80 without EGR. I Need shippment to Switzerland Thanks for Help

Used union assembly from a 78 2F. Sandblasted clean and ready for your paint. $38 shipped in the 48 Paypal Friends & Family drake.m@phoenixdyno.com

Hi all, I'm going to be tackling my exhaust soon. While most of the parts seem to be easy to source, I cannot for the life of me find a supplier of an aftermarket Y-Pipe. My question is, are their really any options left for replacing the Y section besides Toyota OEM? Or is this something that...

Hey All, I recently got an entire throttle body from a junkyard that was from a 02' Sequoia. Everything looks the same as my 98 LX470 throttle body, except for this metal screw in pipe (as pictured) that is in addition to the regular body. Can you guys tell me if I can just go ahead and unscrew...

I'm writing to share my experiences with the bosal brand y-pipe available all over the internet. I installed this part back in Feb of 2013 and paid $198 shipped. You can see what has just recently occurred in the attached picture. Fortunately for me this item is under warranty and I will be...

Anyone have the FJ62 exhaust center pipe (between the cats and muffler) from an FJ62 laying around that's in decent shape? See pic.

Part #'s: 25870-61020, 25620-61120 Location of seller: Edmonton, AB Willing to ship: YES New or used part: USED Price: CAD $75.00 Description: Removed the EGR Assembly from my 1991 FJ80. This includes the EGR Valve, EGR Vacuum Modulator, and the EGR Pipe. Does not include gasket or mounting...

hello everyone i just finished working on a 1hdft, now need help with the vacuum lines this is a non EGR system, i have searched a lot couldn't find anything :/ a disgram or picture would help loads! thanks in advance

I need a substitute for this part.

Could this gasket go anywhere else? I found it in driveway and don't ever remember taking of the modulator pipe thingy. Just wondering about any other possibilities. Thanks

I dropped a drawing of the 2F EGR pipe flange at a laser cutter and am waiting on per unit prices. of course the more I buy, the less they cost per piece. This part is to be made of 3/8" plate and is meant to be welded to the oem EGR pipe to replace warped flange. I'd imagine the final cut piece...

I’m trying to restore a 79 FJ40 and could use some photos of a correct tail pipe bracket & cushion (right rear corner after the muffler) and what the assembly should look like when installed on a cruiser. If what I read on the internet is correct I believe the 79, 80, 81 and perhaps 82 & 83...

Wondering if I should stick with this metal pipe/rubber hoses combo on the heater tap, or fit the single piece hose, (pipe delete) I am a bit concerned that the 1 piece hose might be a weak point given the extreme bends in it, and also wondering if they look as neat as the pipes?80 heater pipes...

When you think your heater core is leaking, but it's really your heater pipe....that toyota no longer sells. I've gone the route to try and get my pipe brazed, but they guy came back 45 mins later, handed me the pipe, said "sorry" and then walked away. So, if you have this pipe and don't want...

I have discovered pinhole leaks in the rear heater pipes. They are too small to see with the naked eye, and are only noticeable under pressure. Can I just solder these holes up, or will the leaks just come back? They are in a bend, so replacing that section of pipe will be a little more involved...