missing

77' FJ40 Had the truck for over a year now and finally beginning to troubleshooting inconsistent headlights/wipers between idle and driving. seems that all signs point to the alternator/voltage regulator. Been chasing the wiring all thru the engine bay and i can't find a voltage regulator...

Haven’t gotten a hold of an emission book, yet. But can someone help me with this. Looks like one line was looped back….while another is missing. Thanks.

I’m getting water coming into my 77 FJ40 cab and I’ve (hopefully ) traced it to the driver side door/windshield frame/roof corner. See attached pics. Let me know if I’m missing weather stripping or if everything just looks to be a sloppy fit. I’m including a pic of the passenger side for...

My truck came with the factory tools in the pastic box in the tail gate on the passenger side, but the driver's side cubby is empty. Can someone tell me what went there? Can't seem to find out in the owner's manual.

Howdy all. Pulling out my dash to fix a D shift selector bulb, I noticed a few of my dash alert bulbs were missing. I've identified 3x missing bulbs for 4WD, F & R lockers (my vehicle didn't come with that diff lock turn switch so I assume that's what they're not there). I am missing a bulb in...

Hi All, I have standard 100 series 4.7 2uz-fe. The soft engine/splash protection under plate/tray has a 'window' for oil changes attached by 2 bolts. Mine is gone. Any know the part number to replace that little 10inch access plate? I'm not looking for the front unit that allows access to oil...

What should be bolted to this threaded hole (red arrow)? Passenger side near starter.

Sounds like a couple cylinders. Took all apart and checked plugs are tight and leads are on.could it be another issue? found this hose and don’t know where it goes I guess it vacuum? Second pic shows where it comes from

~4 weeks ago I had our LC lifted by pros with a Kings kit from Filthy motorsports, and had the installer use the Dr KDSS bracket to fix the rear panhard bar angle as part of the install. Spidertrax spacers were installed as well to prevent the front wheels from rubbing. The installer marked...

My son came home from work today complaining that my cruiser would not go over 50 and the gas peddle felt sloppy and when I went out to look at it I found a screw had fallen out on one of the linkages. I'm hoping someone can tell me what size screw I need to get to replace it. I've attached a...

Anyone know if they are still in business? I have called them 1/2 dozen times no answer or return call.

Noticed that the underside of my Prado is missing something when compared to other photos of the undersides, what is it that I'm missing and is it very necessary?

My 83 had missing radio and wasn't able to find a plate as hole is different from earlier years. Found a guy on ETSY, Paulo from Portugal, who took my dimensions and fabricated one. Very reasonable price fits well, although I did need double face tape to secure properly.