injector pump

Hi all, I'm in the process of identifying a fuel leak in the side of the diesel injector pump. I have removed a few components but am struggling to understand how to remove the nut in the photo. I have watched a few videos and consulted the repair manual but I feel like I need it explained to...

Trouble shooting several issues with my 1975 HJ45 ...run ok once it warms up but I've no found the dip stick in the fuel injector pump is bone dry...how bad is this and how do I fill it to show some evidence of oil...?

Hi, I had a leak from the rear of the injector pump on the 1KZ-TE. I took off the injector pump and replaced the o rings and put the pump back. The engine started up but it still leaked. I figured it was from the rear valves since I didn't replace the gasket on those. I only wanted to replace...

22100-67070 and 22100-67120 are both 1kzte injector pumps mine is the (22100-67070 older) i have a (22100-67120) diesel injector pump currently have a major issue with the TCV and havent been able to get any info if TCV's were interchangable. so now my question is are the injector pumps...

Hey guys interested to see if anyone could point me in the right direction i have a fuel injection pump leak which i suspect to be coming from the back of what i believe to be a timing control valve and was curious if it could be a simple fix of just a seal (if so does some one have a part...

Ok so a bit of a confusing one but I’d better put it out there coz I feel like a numpty atm I have a 1990 hzj75 ute I blew the motor I bought a 1hz from a 1994 80 series I switched over the injector pumps because the one I bought was ****ed thinking they would be the same or at least the same...

G'day everyone, I have here a rotary injector pump off a 3B up for sale. Part no. 22100-55201 Located NSW Australia. Can ship at buyers expense. Looking at $750 Aud for injector pump. Can also add fuel lines and old injectors if needed for an extra $100 Aud. Ran perfectly when it came off no...

Hi all. This is my 1st thread but I'm getting severely desperate for ideas so im gonna describe this in as much detail as i can as i can't afford a diesel mechanic. So i have a 1980 HJ45 (H engine), recently noticed leaky welsh plugs behind the IP, removed the EDIC motor & IP, replaced the...

Hi there, just want to share my experience (as a warning) from pulling a pump out of a 1993 Toyota 1HZ engine. I was probably the first pulling the pump from that engine. Except the special service tool, which I replaced by a home brew puller, I followed the manual. The puller was made from...

Hi there, the pump on my 1HZ engine (1993) is leaking. It appears that the diesel is dripping fro the left hand side time cover, thus accessible without taking the pump out. I have had a look into manual and suspect that the two o-rings behind the timer cover are worn out. I have the o-ring...

gs - long time 2f'er, trying to get my first 3b up and running.... background: got an 86 chassis with OME suspension i want to use, then got an 83 3b and 5 speed to put in....had to move the forward engine mounts, among other problems, including a seize over this last winter, which i recently...

Hi guys, simple question that I cannot find an answer for. I have the 1hd-t engine in my car and have an ft pump sitting in the garage shelf. It needs to be taken to the shop and tuned back to specs. My question is: are there any differences between the two, can they be interchanged and if yes...

Hey all. I fit my boost compensator, played with the timing a bit and been trying to tune fuel my 5lt injector pump and have run into some interesting problems. When the engine is cool/cold it seems to run pretty well. But when Ive made it about a mile or two and the engine is closer to temp...

Hey everyone, I have been searching around the forum for the last week or so trying to find some information about the 1HD-FTE, and especially the injector pump. I'm considering a new build, putting a 1HD-FTE into a FZJ105 with an auto transmission. I've seen Joff's thread, which was a great...

ive had my 80 making this buzzing noise for about 5000ks now doesn't miss dosnt idle funny only happens from 1/4 throttle to 3/4 throttle I'm not real keen to pull apart my injector pump I case it isn't the problem can anyone shed some light on the problem it's driving me mental and I'm not...

heya all, Is there any chance a volunteer could plese check if there are any spacing washers on the power-steering unit in-between the mounts and timing-case cover. There are two front mount and a rear mount. One of the front mounts strides the cover and case We erred when we didnt card all...