help!

Hi all, I've been dealing with a charging issue for several weeks now and currently have my alternator at an alt specialty shop. They inspected it and found the stator, rectifier and diodes all to burnt and need replaced. Due to being a 2h 24v with the vacuum pump, parts are essentially...

I recently had my steering rack and CV Boots replaced. The other day I was in Drive, foot on the brake and this loud knocking started happening. Sound was coming from engine bay or under it. Does not continue to knock if in park or neutral. Any ideas???

Alright guys, need some help here. Im getting a loud womp womp / chug chug sound as my tires rotate - the speedo jumps and matches the sound. Here's a video: Untitled When the video goes dark, I put the phone next to the transmission, which is where im hearing the noise emanate from. Its more...

So I have been reading AHC threads for days but still would like some advice. I bought an 06 lx470 last month. When I inspected the fluid in reservoir was low and would not go into low or high mode. I topped off the reservoir and ran the test and from low to high it moves about 5.5-6 lines...

In the process of desmog and rebuilding the manifold and gaskets. Figured I'd post some picture of my carb was rebuilt by @OTRAMM 2 years ago. Would like to know if anyone sees something out of the ordinary or needs adjustment or replaced while I'm putting it all back together. Any help is...

i just pulled my motor, tranny and tcase out of my 95 fzj80 to rebuild the motor after it blew. I want to rebuild the tcase because it was not well cared for by the first owner and I am guessing the fluid has never been changed. My question is what rebuild kit do I need, I have looked a marlin...

help I was tightening bolts underneath my lx then al the others were tighteneing well But this one broke now what?

Hello, all! I've been wanting a bug guard for my rig for a while now. Last year I bought one off of some site called Brandsport.com. The guard I was sent did not fit. It looked too big, and the holes didn't line up. The instruction manual and box both said Toyota, though. And it looked like it...

So my 87 Fj60 had an encounter with some salty flood waters a little while back...and due to a combination of weather, work, and just a lack of time hasn't been driven for about a month. Long story short I went to take her for a drive today and the drivers side rear wheel will not move at all...

Hello all, I got a challenge for you! I have a 1976 FJ40 in Nicaragua, i say that to preface the fact that anything goes, take nothing for granted when pondering the cause of my issues, and parts are very hard to come by. I was noticing a loud clunk in my rear end, so I propped it up and...

Started feeling a slight vibration when changing gears. After about 10-20 minutes I was driving in 5th and things seemed to go haywire (clutch slip I think?) and an extremely loud knock started causing me to pull over and turn off engine. Knock is in time with RPMs Initial look under hood...