fj60

1984 Toyota Land Cruiser FJ60 - Rebuilt Wanting $10,000, firm. Sitting at roughly 292,000 miles. Bought at roughly 284,000 miles, then rebuilt engine. Was my daily driver since rebuilding for about 6 months, and has been on one off-roading trip. Runs and drives great on and off road. Was hoping...

Brand new old man emu FJ60 2" lift springs, standard weight. Has OME SB30 bushings for use with early 40 shackles. Currently have them fitted to my 40, will pull them if someone wants them. Also have 2 sets of Superior Engineering high clearance U-bolt plates from australia. Front - CS003F...

Introduction and Backstory I’ve decided to start a thread for my cruiser build, and continue my story here, which I'm calling the Forbidden FJ60. Some of you know my story which I've posted throughout my time here, but in general I’m currently on year two of trying to turn an unlikely land...

SPRING CLEANING/CHANGES Make offer/trade LOCATED IN Salem Oregon Full drivetrain from 76 fj40 with 4 speed and transfercase was told it ran, turns over valvetrain moves as it should and you can hear it making great compression. Make Offer unknown miles 3 on tree transmission and transfercase...

I took my ’85 fj60 to a tire/brake shop today to have a flat checked to see if it could be repaired. I handed them my keys for them to drive it around never guessing they’d force my ‘86 Camry key that was on the same ring into the ignition, turn it with pliers and burn out my starter. When they...

Hey everyone, The time had come once again for me to attempt to smog my 1987 FJ60. Unfortunately, this most recent test did not provide me with the answer I had hoped for and resulted in a solid FAIL. Long story short, I purchased this truck from the original owner's family back in late 2018...

Hey all! This is my "first"/official build thread. I have a relatively young family, a 7-year-old and a 7-month-old. Things are slow regarding purchases and work done to the ole 60. However, I would like a resource to document some of my steps, ask for help, and make some friends along the way...

I’m looking for a dash pad for my 1982 fj 60. Any color will work but preferably brown. Im in Southern California and will pay to have it packaged and shipped.

This is a take off from a 5 speed H55f. I had it replaced because it whined at highway speeds. I was driving in a pretty high RPM range because of low differential gears. This could work for you if you don't mind gear whine, or you're not driving on he freeway. This is a cheap transfer case for...

I'm looking for the rectangular insert with both the Brake and seat belt idiot lights. If anyone has a source I would appreciate it.

Just did a 1 ton swap, don’t need the rear anymore. Soon will replace front. Make me an offer, must pick up. Ontario, California

Hi all, The PO of my 60 used a 40 series rocker arms set on my upper end, going through the rebuild I noticed my bolts weren't threading in all the way. I think I can make it work with bolts that go halfway in as long as they're torqued but wanted to see if anyone wanted to do a trade on the fly...

A well loved set on sale if anyone is interested: https://www.ebay.com/itm/175624980514

De-smogging my rig, looking to sell the parts all together to the right buyer. Should be comprehensive in all parts. Coming off historically SoCal 85' (Manu date July), everything was working as far as I know and it passed smog according to PO not long before I bought it in 2021. Doing a rebuild...

Just got my 2F machined and rebuilt. Machine shop sent need a slip of cardboard specifying which oil they said I should use. But they didn’t say which type. What do you guys run? I’m at altitude at 5800 ft in cold ass Idaho Thanks Dan

in the midst of finishing an engine build and considering leaving the smog equipment off the rig and not bother with it. Im in Idaho so I won't need to get it tested. From driving the rig for a while it seems like all the equipment was making it run worse, and as im going to put a header on...

Description: Hood Emblem Silver color P/N: 75303-90A00 Condition: New & OEM Fitment: GX & STD https://japancars.ru/TOYOTA/7530390A00 (Press on applicability to show fitment) Price: $299.99 Shipping: Dhl for $34.00 Payment: PayPal

Hi all, I need an fj60 2f engine pulley as mine has its threads shot. Unless there's a way to just replace to threads I need a new pulley. Thanks Dan

New in box SOR sliding cargo windows with OEM replacement window gaskets for FJ60/FJ62. Current SOR catalog price for all is $830, asking $415. Possible delivery around the Ventura CA area. Shipping across the country could be as much as $100.

$75 plus shipping from Houston 1981 and up - 2F