fj60

Won a couple items at solid axle summit, but they won't fit my setup(s). Looking to trade for other parts or sell to buy other fj40 parts. Selling: - Tuffy locking console with mounting bracket for 73-79 fj40. (New in box) - Fusable link replacement kit for FJ60 from cruiser trash. (New in...

Hello all - I'm looking for the definitive instructions (hopefully video) on pulling the a/c evaporator/expansion valve housing from under the dash, on a '86 FJ60. I'm replacing all of the A/C components and converting to R134a. I have new Denso components : Compressor 471-0204 Evap core...

I have a 60 with a GM V8 conversion and 4 speed. Currently a small block. i’m going to be converting this to an LS automatic, so the 4 speed, clutch, bell housing and conversion plate is available for sale. Still in the truck, but will come out when sold. I’m still driving it. Let me know...

Original alternator from my old Fj60. Spins freely but will need to have the voltage regulator replaced. I went ahead and bought new Toyota brushes, springs, and a regulator with the plan of rebuilding it. One of the long phillips head screws has had the head destroyed, I have a replacement I'll...

Looking for a late fj60 intake manifold. Going to the 3fe exhaust manifold route and don't want to take apart original manifold. If it has an egr that's a plus.

Got an 84 60 front bumper that is available. Used but good shape. Pictures show scuffs and scratches. One chrome carriage bolt didn’t come out willingly, picture shown. Have 3 out of 4 chrome carriage bolts for it. Can deliver to Redding, CA pretty easily, Reno, NV and Bend, OR can be...

Looking for a complete 2F carb for a 84 FJ60. Have a serviceable one running currently but would like to pick up another one to do a rebuild without taking the truck out of commission for too long.

I have a 4 piece set of Australian Door Cards for sale. Black Textured ABS Plastic, perfect condition! $215 shipped to lower 48.

My wife gave me a Retro Sound stereo for my birthday (pic below). It looks like it’s meant for a ‘72-78 FJ-40, but I have an ‘83 FJ-60. Anyone have any experience putting one in an FJ-60? If so, how’s it go? Any pics?

I need a fj60 TC. Thanks all.

Thinking about selling my Trail tailor Axle swap kit and parts with it. Been looking at getting an E46 wagon to use as a half track car half daily driver and my 60 works ok as is for now. -The axles are from a FZJ80 with a full floater rear and have all of the control arms, steering, ebrake...

This transmission has a leak in the front main seal. I had been trying to track down an oil leak for months from my engine and it turns out it was the transmission. Anyway, I ended up swapping to the H55f 5 speed and have this tranny for someone who wants to rehab it. The previous owner gave me...

2 rear defrost switches - useful as is or to be converted to other aux switches ( i.e. fog lights) $35 USD ea . 2 Diesel Filter lights from late model BJ60 / or HJ60 $ 25 USD ea. shipping /duty /fees on top - Thanks Also have tons of other FJ/HJ/BJ 60 (62) dash switches /parts...

New poster here. Been lurking for a while for tips and tricks to keep my truck keepin' on. Mine's a tan '82. I'm the second owner, and it has just over 208,000 miles on it. All original except for the stereo, which itself is from the late '80s. Almost period correct. LOL I'm growing weary...

I sold my white 87, and am now on the hunt for a 60 in my preferred color. Considering all 60s in Red, Brown (-84 chocolate preferred), Blue (any), or Tan. I might consider other colors but do not want another white 60. Original paint preferred but will also consider repaints in same color. No...

1984 Toyota LandCruiser FJ60 I have owned this FJ60 since 2009, bought in the Austin area. I believe it was a California truck before that. Clean Texas title in my name in hand. 212,000 miles, 2F, 4 speed. Engine was rebuilt including new crank, 10 years ago by Butch Baker (local 2F...

Both removed from running 60s during engine conversions. Worked when removed. 1 needs a shim washer added to the clutch. Original denso $40 each?

2 shackles. 3/8 thick plates. 4-13/16 between pin centers. Dont recall how long these were installed. Really just cad plate worn off where they contact the bushings. All hardware included $50 plus shipping.

Hello, my back windshield blew out and I am looking to get it replaced but need an OEM weatherstrip. I checked Cruiser Corps but they are out of stock. I also checked CruiserParts.net but their site is a bit gnarly to navigate and I didn't find anything. Does anyone have any suggestions on how I...

Had a good run with the current rig but sadly it needs to go to make room for another project. It is in relatively good shape (just passed CA SMOG, again). Has 287k miles but the engine was yanked and rebuilt in 1999 at 223k miles. I have put a decent bit of work into this thing over the last...