egr

I replaced the diamond gasket on the EGR j-pipe this weekend. I also put on a shiny new ferrule and cleaned up that end of the pipe. When reattaching the pipe to the cooler I noticed that the pipe seemed to have a bit of play and not be very tight. With the upper flange unbolted and the...

My 1990 FJ62 has always idled a little high at 900 - 1000 RPM for as long as I've owned the vehicle. So I started a project this weekend to clean out my throttle body and recalibrate the throttle position sensor. Turns out that the throttle body was already pretty clean but the air intake...

Hello All, I have been searching and can't find the answer for this. I have an Exhaust guy working on my FJ60 for a leak where the J pipe (25601) connects to the manifold (Gasket is bad #25628 on picture below) so i purchased a new gasket for him to put on but he couldn't get it disconnected...

I'm located in Canada, looking for parts for my 1991 FJ80- random stuff mostly that I don't really care where it comes from. - rear washer nozzle (rubber bulb above the rear glass) - 4x seat bolts - fender flare hardware for the rear 4 fender flares. (Cage nuts and bolts, about 8 of each) - 1x...

I have been accumulating boxes and boxes of parts I have accumulated the last year and a half from Dan and Onur that I am finally getting around to installing, along with doing some other cleaning up and refreshening to the old Mountain Goat. The game plan: New fuel filter, new fuel sock, new...