distributor

So I've been chasing a spark issue forever trying to get a 77 2F running. I think I found it today. There is/was a metal "shield" inside the distributor that separated the points from the rotor/cap. It just sat there, not screwed down but when you put the rotor on it stopped it from coming...

Calling all gurus, I have a '94 FZJ80 aussie spec. I've had a problem that Ive been trying to solve for a while but cant get to the bottom of it. I have a hesitation when accelerating from idle to 2000rpm, the best was to describe it is like theres water in the distributor. After 2000rpm, the...

Trying to properly desmog my 86 FJ60 2F which was half a$$ desmogged by a previous owner. Having trouble sourcing a rebuilt aisen carb and recurved distributor. Any ideas?

Looking for a new distributor unit for my 62. Are these available new OEM anywhere without an exorbitant price? If not I guess I’m on the hunt for some high quality used sources that have been cleaned and tested. Thanks!

Need a new distributor. Any recommendations on brand? Seen them fro $300 to $500. Also need a diagram or pics of wjere the condensor goes into it

the distributor has internal fail ash’s need replacement. OEM best option? Any other options? Part #? Thanks

Selling some extra parts I have laying around Happy to ship on buyers dime. Intake manifold- $125 Exhaust manifold-$75 Distributor- $50 Alternator- $50 Fuel filter- make offer? Timing cover-$20

I did the tappet cover gasket on my 2F this weekend including pulling the distributor out. I made sure to put the distributor back in the same rotor position as when I pulled it out. I did not have a timing light on hand to verify timing, so I adjusted it by ear and set it at the smoothest...

Hi all, I have been hunting for what appears to be a discontinued item-- distributor cap for Jan 1980 CA FJ40 (with smog). Any suggestions where I might source greatly appreciated. Best, Ed

Selling this HEI Distributor along with a set of new wires (stock connectors are different). I bought this for my recently completed restoration and it ran great, but I decided I wanted a more stock setup and switched to a '78 OEM disti with no points. This has approximately 50 miles on it, if...

Came off of a running truck. $100 plus ship.

Have a dizzy and coil off a 87 FJ60. Bought for my FJ40 but never installed. Came from a running engine. Located in Chattanooga, TN $250 plus shipping.

Are semi transistor electronic distributors still available for my 79'fj40?

Looking for a '78 Distributor electronic with vacuum advance

These are in non-US spec FJ56 amongst others from 1-75 to 07-80 F or 2F engines. Works in late F or 2F engines. Could use some cleaning. Keep as a spare if needed. Part #19100-60091. https://www.cruiseryard.com/toyota-land-cruiser-fj40-fj55-fj56-mechanical-advance-distributor-19100-60091/

For the experts, is this a non stock dizzy? its on a 72, 55

I've attempted to find the timing procedure specific to a 1977 CA Spec Distributor. The link below indicates that I have a CA Spec (Advance + Retard vacuum ports) on my distributor. I'll attach a photo of it as a reply to this thread below. 1) When setting timing, do I disconnect (& Plug)...

This is how I have my distributor set, I'm afraid that I have it a tooth off on the cam. 83 Fj60 dizzy and flywheel on a 1.5f don't really know if that makes too much of a difference

Discontinued item, 09/1973-1975 i believe. Asking $600 shipped conus

Doing a complete rebuild and wondering if this is a good way to go? If so what supplier carries it? Thank you...