Final part needed to complete the dash on my 1967 FJ40. Looking for a ‘67 or earlier Cowl Vent Pull knob and cable.
See attached pic with red circle and arrow for hole shape and dash location. See attached pic with green circle and arrow for example of needed knob.
Anybody have a spare they are...
My 2008 has the footwell leak. My weather-strip fix only worked for a while and I'm finally ready to give in and get the replacement cowl.
There are numerous different part numbers quoted in the various posts. Part # 55708-60091 is much cheaper than 55708-60101. I've seen conflicting...
In southern Oregon I have a partial body from a 1972 FJ40.
Cowl is is in good shape. Floors are salvagable, B-pillars back sheetmetal is trash.
If not needed it will be scrapped.
My a/c fan blower died. Water on the passenger side floor board. Motor plug and the drain tube from the blower housing were wet. Verified the fan switch turns on 12v at the plug on the side of the blower. I guess the contacts in the fan are corroded but I haven't taken it apart yet. It's...
Hi all,
I recently came across a 1980 BJ42 LX (factory ac, power steering, 3B engine) for sale semi-locally. The first set of photos I received was pretty promising. Owner assured me that the vehicle runs well, but the body will "need some work". My Dad and I are a fairly handy pair, so I...
ok here goes.... I've been chasing a water leak for a while now. I have cleared all 4 sunroof drains and even changed the little plastic guide plates for good measure.
So. I had my windshield resealed--- didn't fix it. called the glass guy back out and he showed me water backed up in the...
Looking for all 1980-ish non rusted through parts:
I need a right hand drive windshield frame (I know fat chance - checking with SOR.)
A pair of 1980-ish fenders (complete.)
A set of floor panels I can weld in for a 1980-ish LC.
FOUND ALREADY:
I need a 1980-ish bib. <- Got off ebay all the way...
Hey guys need some ideas, been trying to find a gasket to seal off the cowl vent. Plan on putting a cover over it from SOR and painting it. Has any of you made a gasket and what did you use?
I want do away with the drain hoses and fill in the holes in the trans hump.
Any suggestion is welcome.
I have a very rusty 72 cowl with a functional vent I'm thinking of using for a project. I really like the idea of the vent but have never driven with one. I have a 78 cowl in better shape but in my mind isent as cool.
Does the vent shift a lot of air into the cab while driving?
Was it supposed...