75 series

Hey I'm looking at building something unique in the next year or so in my 1990 hzj75 ute. Mainly looking at trying a 12v 6bt with a td42 box and transfer. Anyone done a successful 6bt conversion in a 75? looking at actually building the motor for big power so its not just stock. I know lots of...

Hi everyone, this is my first post. After years of wanting to own a beast, I finally have one. I’ve recently purchased a 1988, 75 series LWB. I want to upgrade the engine and had either diesel 1hd-fte or the petrol 2uz-fe in mind. I also plan to swap the gearbox for an auto ( sac religious I...

Whether it is a good or bad idea has yet to be seen, but I was able to purchase an old 1992 75 Series 1HZ troopy. Mechanically seems legit at first glance, body and interior are a bit rough but those should be easy fixes as the interior is pretty sparse to begin with. I am rookie with dealing...

Hi. Just looking for what diff oil i should be using for my 1995 75 series rear diff which has a diff lock in it. And also how much oil to use. Thanks

I have just bought a ‘93 75 series 1HZ Troopcarrier. And I was in the process of flushing the brake fluid when my eyes shifted focus to this. Just need to know now, if this is a deal breaker for this vehicle, and I should cut my loses or what. I already have an appoint to get some rust cut out...

Up for sale is an almost complete new rear oem bumper for a 75 series Troop Carrier. Look at the photo for part numbers. All the parts are new in box. Buy the whole lot for $250 NOW 100$. local in SW Portland. Also up for sale is the oem antenna. $35 obo. ( willing to ship this item...

Just wondering if anyone could give me suggestions on how to coil the front end of my hzj75. Heard about using an 80 series axle but I was thinking maybe 79 series coil mounts could fit on my original axles with a bit of help (fabrications) . It’s my first car and maybe I’m a bit naive but I’d...

Hi Mud techs, Need a little help and assistance around the tie rods since it is my first time doing the change out. The manual says the tie rods should be screwed in equal lengths into the tube to give you ~1.267m total length. When I got to mine, they were all different lengths. I did the...

Has anyone done this conversion? Does toyota have a bellhousing that will fit the 2h block from the h150 or h151f? The old h55f just isnt up to scratch, never has been. Looking for a better box for a custom 75 series build.

Hi just wondering if anyone knows the length of the body mount bolts as I am installing a body lift and need the bolts but do not have the vehicle with me at the moment.

Hi, just an introduction, I bought a 1991 1HZ 75 Series Cab Chassis Ute last year, been loving it Then busted a front spring and the only cheap replacement I could find at a wrecker was a 60 series rear spring, so on it goes with a two inch extended shackle and all is bingo 👍 Except my...

Hi all I have searched many of threads but can't find nothing solid.. I am the proud owner of a 92 hzj 75 with 1 Hz done 675,000 kms. I have just purchased a 1hd fte full conversion with wirring loom right back to key. Am half way through pulling old loom out will post many of pictures as...

Hello, I am looking at a new FJ75 project that I would swap a 1HDT into (the vehicle has a good H55f in it behind the 3F.) I have been reading about the challenges with attaching the 1HDT to the H55f so I was looking at using an H151 but what I have not been able to find is the relative...

Does anyone have any information on replacing the front inner wheel well on my 73 series lx landcruiser 87'? I heard wheel wells from 75 series are compatible? Attached images are of the damage.

Good day All, My 1hz LC starts easily when I start the car after leaving it for more than 30mins. But when I turn the car off and start it after 2-3 mins it only cranks but does not start. Is there something wrong with my glow plugs. Maybe the glow plugs are wet? Please assist.

Hey fellas im looking to but a h151 gearbox into my 75 series ute instead of a h55 just wondering if someone coukd tell me what that involves modification wise or will it just bolt straight in? Are the 79 series running this gearbox and if so can i just use a h151 from an 80 series and use 79...

New or good condition factory box with headache rack to mount on a 75 Cab/Chassis. Western USA or Canada preferred, but will entertain creative alternatives at the right price. :) PM me with info and thanks in advance!