Hi. I have a 1997 Prado VZJ95L-GKPEKV. It's originally a Dubai landcruiser, but was sent to the Philippines at some time. Long story short I ended up having to break the window cause keys got locked inside and my dog was still inside in the sun.
I have located the part number as
68123-60110...
Davao is safer than CDO in my opinion but still bombs now and again in both cities. 20 years here so know of at least 4 or 5 in that time. The kidnapping actually happened on Samal Island not in Davao.
The trip through Buda is nice. Was just up there a couple of weeks ago wishing I was in the...
Where are you located? I'm down in Davao and have one that's a hodgepodge of parts as well. I think only the diffs and frame is original. The body is now rust free cause it was pretty much rusted completely away. All backyard fabrication by a couple of young blokes who are magicians with a oxy...
Usually there is a decent window but you would really need to check the TDS for the paint you are using. I know the Dupont paint I used on my car had a 3 day window.
I recently installed a turbo on my B engine and it makes a noticeable difference. It's a pretty simple almost bolt on upgrade except for a weld in bung and some exhaust mods.
I pretty much gained a gear on steep hills where before I often had to gear down to first I can easily do in second now...
I was able to find one in a surplus store in Davao but was most likely just lucky. It wasnt perfect but better than what i had.
How bad is your current one?
Where are you located?
Those only good in sand with low pressure as they don't dig in like heavy treaded tires. Ran them on vehicles in the middle east when I was working there. Not good for much else. Rain mud etc forget about it.
I concur on removing the hump. I was able to do by myself on a lift with a engine lift from the top. Took about 1/2 day from start to finish. Would have been easy with a helper to line things up, but possible on your own.
If you go all LED you will definately need a dedicated LED flasher unit. If changing only 1 it should be okay as you will still have resistance from the other lights.
Does it blink again when you go back to regular bulbs?
I'm converting the 24V setup FJ40 with 12V. The previous wiring was a complete mess so hence decided to go with the 12V swap. It was originally a gas engine and was swapped for a B engine years and years ago.
I got the alternator, starter, glow plugs, wiring harness, gauges, wiper motors all...
I was thinking the 2 on the bottom middle were the motor mounts for the B type as they sort of match the home made ones currently on the frame as one is slightly higher than the other. Unless they are for the F engine?
All parts were bought as BJ40 parts according to the seller.