Island Hopper Philippines

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 19, 2016
Threads
7
Messages
38
Location
Cagayan de Oro, Philippines
Native Texan retired to the southern Philippines 4+ yrs ago. Found a local chopped up, rusted out, bondomobile BJ40. VIN on frame rail indicates a Feb 1978 build. I suspect this is the only original part of the truck. For fun, we chopped some more, added lots of bondo and painted the rust. It will be our beach/mountain/island hopper. I realize this forum is for stock, original, factory only parts and complete history and provenance, but for some, it's just for fun. Autometer digital gauges, Moroso toggle switches, Rigid aux lights front and rear, Boss ATV/ marine 800W bluetooth speaker system under the seats, Honda steering column, Seats of unknown origin, Bell Neoprene seat covers, Ironman Susp 2" with leaf #2 and #4 removed from each pack (rides better than my '04 Wrangler with coil springs), Fabricated roll bar, bumpers and side steps, LED head and tail lights, 4 wheel drums, twin stick T/C conversion (love the 2W Lo in the Philippines), Cheap generic steel wheels 16 X 8 1/2 , BFG A/T TA KO (Original tread design) 265/75/16, Speedo runs off GPS, Tach registers RPM off alternator (Diesel). B engine and 4 speed and T/C needed nothing done. Truck cost $750. Put a little more than that into it. We can take it on the ferry to any of the islands and cruise around. I'm 70 yrs old, so longevity is not a concern. I'll rust out before it does.

Here is a before and after:

BEFORE:
Island Hopper 2.webp



AFTER:
Island Hopper 1.webp
Island Hopper 4.webp
 
Where are you located? I'm down in Davao and have one that's a hodgepodge of parts as well. I think only the diffs and frame is original. The body is now rust free cause it was pretty much rusted completely away. All backyard fabrication by a couple of young blokes who are magicians with a oxy acet torch.
 
I'm in Cagayan de Oro City. Same situation as you. Couple of jeepney repairmen fabricated everything--Seat mounts, dropped a section of floor pan to accommodate the speaker system, bumpers, steps, brackets, braces, dash, steering column mount, exhaust mounts, lighting mounts and a complete and total rewire from scratch. Was yours like this?


FJ40 3.webp
 
Performance Industries did the suspension work which was the only "professional" work done on the truck. The new body mounts and removing 2 leafs from each spring made the ride much smoother. I don't do off road or carry heavy loads, also do no towing, but as you know, filipino roads are an adventure all to their own!!!
 
Performance Industries did the suspension work which was the only "professional" work done on the truck. The new body mounts and removing 2 leafs from each spring made the ride much smoother. I don't do off road or carry heavy loads, also do no towing, but as you know, filipino roads are an adventure all to their own!!!
One of our planned excursions is over the mountains to Davao. Our first real outing will be to ride the ferry to Camiguin Island and drive the road circumnavigating the island, up to the volcano hot springs, and down the valley to the cold springs. I feel safe there--now, you have to have a pic ID to enter the island. I'm a little concerned about Davao--they kidnap white people and cut their heads off. Do you feel safe there?
 
Davao is safer than CDO in my opinion but still bombs now and again in both cities. 20 years here so know of at least 4 or 5 in that time. The kidnapping actually happened on Samal Island not in Davao.

The trip through Buda is nice. Was just up there a couple of weeks ago wishing I was in the FJ40 with the top down.
 
Ok, thanks for the insight and input. Sounds like a perfect road trip for the Island Hopper. Maybe we could meet up sometime and compare fabricators, or at least sip some suds. I wish you well.
 
That dash transplant is incredible!
 
Back
Top Bottom