Recent content by pocholin

ok need to use fjcruiser caliper and rotors

i found that the fjcruiser caliper had de same size caliper of the runner and the disc brake is 31.9 size.. so need to do the same mod as jose did but.. no need to change wheels to 17 size

that a good clutch the xtreme out back... a

hoo hoo hoo.....

Well ita done ... now.. need to measure axleshaft to make it....

hello, this is a old treat but .... I have problem instaling this gears in a HF2A fron a lc105 ... I already chance the imput shaft ... but when I close the case... the shaft doesnt aline... do I need force it.... I dont thinks... I have 3 day looking all over the internet if the transfer...

Need work a lot on the latle, the inside diameter of the OEM housing tube, is Way to big for the ruff stuff spindler, so need to re-size the spindle, the hubs need to re-drill the lug to acomodate 12mm lug

Nice Im using OEM axle housing.. i bougth spindle and hub from ruffstuff for 14bolts 6 lug , cutting 3/4 inch wider each side from stock 80 ..

its plug and play... and the pedal sansation is less smushy

good post... I delete de LSPV valve.. but didnt delete the return line to the front caliper.. to keep the pedal feel the same... the first time I delete the return line .. and was hard to tune the manual proportional valve... then I re instal the return line and know its much much better...

this is the best news I have.. its much better to change the spider gear ..., what did you used. I bought the spline and hub from ruffstuff to for my rear convertion

what I know so far, dana 70 35 spline and more, 14 bolts 30 spline only but they are with different pitch, tundra 36 spline, they all share the same diameter 1.5 inches I have already written to those who recommended me, I am waiting for their response, I don't call them because my English is...

I spoke with the Latin American arb representative and he told me that this should definitely be consulted with the arb engineers... Many of their parts share the same sizes to lower production costs. since the axleshafts are customized, I think that making them with the tundra splines is...

yes that right go over the hubs

thank mate... Im going with ARB locker... I didnt know I can change the side gears... that will be awesome ... !!!!!!.. do you have any idea who can give me that info...