Recent content by NateK

Can someone who has these brackets take a measurement to the inside surface of each bracket when installed on the crossbar without a light bar? I'm trying to figure out what bars might work and not all 40" light bars are actually 40" at the mounting points. I believe the black oak is 42", is...

Yes. I did the tundra conversion, lockers, gears, and winch all at 1,099 miles. Tires came about 400 miles later. I actually ordered the majority of the parts before it was delivered. Happy to oblige! I was pretty surprised at the 30-35% loss as well, despite the tire combo being almost...

I was curious... Run 1: 252hp/272ft-lbs Run 2: 258hp/282ft-lbs Run 3: 249hp/284ft-lbs ~90°F ambient temp after the runs were completed. 4.30 gears and 285/75R18 AT3Ws 22k mi on the truck, 21k on gears. Not sure how to post video if anyone even wants to see that.

The track width on a Tundra is 3.3" wider up front, and 3.5" wider out back (1.75" wider per side in the rear) than the 200. At stock height or very small lift 1.75" spacers make the track width spot on. For 2" lift or more I'd do 1.5" spacers to account for the narrower track when lifting IFS.

Would you mind posting the link here? I'm hoping to get mine installed next month and would like this as well.

Yeah... I really need to detail the interior.

Finally got my remote start installed so I can have the dealer do the techstream activation when it's in for some warranty work next week. Is there anything else I should ask them to do in techstream while they're in there? Planning on asking them to do the window roll down on lock...

Tundra Conversion up front, 1.75" adapters in the rear to match the front track width. OEM Tundra front struts on OEM strut spacers and Durobumps Tundra bumpstops in the front. (1" lift) OME 2721 rear springs with Airbagman HD bags in the rear. (1" lift)

Few more:

These are all I took: LF essentially fully drooped LR essentially fully stuffed RR fully drooped (off the ground) RF fully stuffed (on bumpstops)

Crossed the 10k mile mark. Figured out just where the rubbing is with the 285/75R18s.

It has, didn't even think of that. The plastic piece is still in place on mine.

I just turned 10k so hopefully they'll replace it and not say it was me when I was messing about with the roof rack as I only removed the basket and removed and reinstalled crossbars. I also have a rattle in a headrest that I need to address. I'm optimistic that it'll be a quick diagnosis and...

One of the rubber trim pieces for the gutters. LHS between B and C pillars. I believe #2 from the link.

Thanks for that! Somehow one of these has disappeared on my 2020 and hopefully I'll be able to warranty it, but if not the PN certainly helps.