This statement led me to the problem. I check my CV and sure enough it slipped out. Had it removed and inserted a new spring clip and it’s good to go now. Thanks you all for the help.
I had the vehicle towed to my house. I am trying with the diff as we speak. Another thing I am noticing is that I can push the vehicle while it is in park. Not good if you ask me
I press it on and off repeatedly but nothing happens. From the time I owned the vehicle the diff lock light did not work so I’m unaware if it engages or not. I will continue to try and see if I have any luck.
Thank you for the help I will update as soon as I get something to work.
Thanks for your reply.
The issue is the rear drive shaft isn’t spinning at all in any gear so I was unable to move. But while in drive or reverse the front drive shaft spins freely but I get no movement from the rear drive shaft. I’m so confused as to what the problem could be. It’s as if...
I have a driveline issue which I think is caused by the transfer case. Yesterday 75 miles into a 100 mile journey I was coming down a small hill on paved road. I started to give the vehicle gas but noticed the RPM gauge going all the way high. At the bottom of the hill I gave it gas again but...
On my 100 the welded area that joins the firewall and the side panel was the source of my leak. When water is poured into the drain hole it trickles down this area and water gets in. A little sand paper and silicone fixed it for me. This was a frustrating leak. Hopefully this helps someone in...
Just to clarify.
I too have an HD-T just to be clear you are running a 44260-60050 steering rack?
Please tell me it’s so. The 1HD model steering rack cost a fortune ☹️
I have the same problem and will try this fix in the coming weeks. Where you able to replace the parts yourself or did it have to be done by and experienced mechanic?
Thanks