Recent content by llfarms

Why doesn't Toyota offer them in the US. I have never seen them when back home. Here in Saudi the are all over the place!

I just use a Wix filter w bracket.. They are for $12... Works great on my GCC LC. Wix 33875 http://www.amazon.com/Wix-33875-Fuel-Filter-Pack/dp/B001DHHU4I/?tag=ihco-20

I've since washed my engine after purchasing this rig. It's much cleaner.. kinda feels like someone seeing your dirty undies! I can see if these are avail from any salvaged hundys.

@cruiserdan or @beno let me know if there are any parts here from the GCC.. alot of those parts are pretty common!

The FSM was also written for my rig 15+ years ago. The greases i used are rate for bearing use. 5% moly will have a minimal effect on heat, say instead of a 40-60% moly grease. Quick advice on bearing grease.. Chewbacca's Birfield Grease Guide This not to cause a fight, but people have used...

The spindle bearing spec nlgi 1 which we packed with AMS Oil Poly Synthetic. The inner bearing used Ngli 2. I used almost 3/4 tube for each. I used the ams oil web site and this is what it specd. My bearings were in good shape but the inner and outer seal were starting to fail because you could...

Grease repack, new nitro UCA, replace UCA ball joint and bushings... Oh replacing all fluids with synthetic.. I love the peace of mind of a properly lubed hundy!

@LockedNLoaded, thanks.. Yeah, I really love their oil filters also. I have pictures and was going to post them to help all the fellow mudders who have really been crucial to making my Hundy a blessing. As for the parts Cdan can help you buy all the oil seals, lock washers, and gaskets. These...

I just did a full repack. It was not as hard as I thought. THere are a few DIYs here and on youtube that will help! Other than brake fluid and AHC fluid, my vehicle has moved to AMS oil. I even used it for the bearing repack... Bearing repack: Front Bearing Replacement There is also a...

Mine upon inspection and replacing my UCA with nitros UCAs and LCA bushing replacement are showing to be worn. I just found these: http://www.amazon.com/Absorber-Polyurethane-Bushing-Suspension-Cruiser/dp/B00YWXRY4G/?tag=ihco-20. They also run around $16 for OEM.

Thank Rob red. I guess I should have meant the measuring voltage will running would be alternator?

It sounds like you had a marginal battery and a dying alternator. It is my understanding that when the vehicle is running that the battery is being charged and the vechicle runs off the alternator. I would suspect it is a combination of the both.

I have this winch on my GCC spec 100 series.. I cant seem to find the fill and drain plugs for replacing the oil. Can somebody point me in the right direction?

I have the Aisin AI1000 also, where are the fill and drain plugs for the ATF? I cant seem to find them?

GCC Spec 2000 Landcruiser, have the slot, no filter. My hundy has the cyclonic engine air filter but Im still thinking why it doesnt have the filter with it being so sandy here. It was surprisingly clean inside.