Hello All,
I have moved on from my LX570 and still had some parts in my garage, all prices are OBO:
SOLD BNIB Starter $150 - new, smaller starter. I kept this in my car in case my stock one...
Brand new, unopened tailgate storage kit for the 100 Series Landcruiser.
Bought then got too lazy to install. My loss is your gain.
Designed with 2 doors for easy access to tools/camp gear/etc...
This is an interesting brass "NI" lock with a "TOYOTA TEQ MOTOR" key. 37mm wide. The Toyota key appears to be for an ignition and is stamped with a standard key number on one side, and the number...
Toyota's partnership with Castle Oil goes back to the 1950s. This tie clip displays the Castle brand and is one of those “mood ring” types that changes color and were popular back in the 70s and...
Lightly used Factor 55 Flatlink E with Rope Guard. Used for recovery a couple times, so it has some light surface wear and dirt, but is otherwise in great shape.
More infor here...
This is a Blue Sea Systems Automatic Charging Relay I used for a dual battery setup I no longer have.
Automatically turns on to charge a second/house battery, then disconnects so you don't drain...
I built these Bluetooth intercom headsets and no longer use them. I installed a Bluetooth motorcycle intercom system in some old aviation headsets.
They work great for riding around with the...
1991 FJ80 Toyota Land Cruiser
OEM Mud Flaps (4) $150
OEM Tie Rod (bushings shot) $50
OEM Drag Link (bushings shot) $50
OEM Charcoal Canister (needs to be rebuilt) (1) $30
OEM Window Motors and...
I’m selling my baby. “Lando” has been a pavement princess since I bought her about ten years ago from Kia dealer who took it as a trade from the original owner in Vernon, BC (left hand drive...
1987 Toyota Landcruiser BJ70. Very rare to find Canadian trucks in this condition. Has had some paint work but overall great condition. Essentially rust free save for some starting on the side...
Australian Landcruiser Bar mirror.
Features two men on a camel with camel prod sticks, and of course an 80 Series Landcruiser. In immaculate shape. Pretty cool item & incredibly rare. Perfect for...
Just replaced these with brand new housings. They’re foggy and yellowed, but all the attachment points are intact. Thought someone may want to take a shot at restoring them. I’ll give them to you...
Best offer on any single item or all of it.
Lightbar cover (50”)
NV4500 to 80 shift adapter
Safari snorkel intake hose (new)
On board air bracket for under hood
Misc turbo kit parts
Got this to swap into my 100 but that has been sold.
I think I got it new as it’s still in the Toyota box and looks to be but I can’t find any paperwork (yet).
Asking $150 Now $75
Part number...
Removed from my 2006 100 series while chasing a noise. Issue ended up being a rear shaft. This shaft has no play, smooth joints, and has 100k miles on it.
Part number: 37140-60520
Asking $100
Selling both battery trays.
RH side is brand new
LH side is used but in perfect condition. No broken plastic or defects. Just dirty.
Asking $75 for both. Happy to ship.
Selling an 1996 FZJ80 locked chassis with body shell. Wiring is all there. What you see is what you get, minus sunroof. Clean titled chassis with no rust or modifications. Great candidate for...
Selling my 1995’ Mercedes G-Wagen G320 with roughly 67k original miles (and climbing as it’s my new DD). It is originally from Japan, brought over to the VA area and now resides in Oregon.
In...
Properly dial in your front end and eliminate excess wear on seals and axles
FSM (factory service manual) directions included
Made from 4130 CrMo
CNC machined for precision accuracy
USA made...
3.5 degrees or 6.25 degrees over stock 80 series arms:
3.5 degrees is 1/2" longer than a stock arm
6.25 degrees is 1" longer than a stock arm
Made from 1" THICK 4130 CrMo steel arms and 4130 CrMo...
Heavy duty rear extended sway bar links
CNC machined 4130 CrMo shafts with CNC bent 11ga HSLA steel bracket
Energy Suspension poly bushings included
Black powdercoating
Heavy duty front extended sway bar links
CNC machined 4130 CrMo shafts with CNC DOM lathed eyelet
Grade 8 hardware, OEM Toyota and Energy Suspension poly bushings included
Black powdercoating...
Pulled this out of my 02 LX when I did the nav swap. It’s in fair condition. Some of the bulbs are burnt out and the previous owner drilled a phone mount into and got adhesive gunk on that lower...
Pulled this out when I completed the nav swap in my 2002. It’s in working order, I had no issues with it when it was installed. Let me know if you have any questions!