- Thread starter
- #61
Yes, but have plans for them, sorry. I need to get off my hind end and send one to @thecrazygreek to print some up.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I engineered this speaker relay for the CB40F for a fellow MUD member. This allows sharing the radio speaker with the CB. Completed prototyping today.
Thanks to @Engineer8000 and his repair work, I have an as-new working ~1974 AM radio in my '78 FJ40. The POs bent back the OEM radio brackets, so with some hammering and prying, the radio is installed as it would have been at the factory on those tabs, with bolts. I get 5 strong stations - one for each preset.
View attachment 3458455
The community needs the knobs (I know there are some 3D printed options out there, but they're not close enough in my opinion) as well as the above face plate with the option, "TUNER". TUNE was for the later National radio 79-8X and frequency began at 53. The earlier National radios (75-78) had a "TUNER" naming convention and freq. started at 54. The Fujitsu TEN radios had a faceplate like the one @SteveH shows above in his photo, correct for that radio.