BJ42 Build up (4 Viewers)

[kling-on]

I'd go to 8s with the 12.50s... Then switch to 10.50s later if you like.

Ya my old 10.50's are on 8 .... I might swap em out IF I go that route stock white wheels is what I want

Sent from outer space via my mind

 

[kling-on]

Replaced my rear brakes today man it stops better... Also found out what's wrong with my parking brake I don't think it should look like this

Sent from outer space via my mind

 

[Sully73FJ40]

Those Canadian winters did some work on that didn't it

 

[kling-on]

Those Canadian winters did some work on that didn't it

Yup just fell apart as I removed it

Sent from outer space via my mind

 

[kling-on]

Replaced the clutch master and removed the rear heater to reinstall the console. It was just too high the other way.. The heater fan didn't work anyway. Smittybilt seats and console. Found 180 prebent hose at Vatozone looks like it will work well as a bypass

Sent from outer space via my mind

 

[kling-on]

Removed the stock radio to cut the dash for the radio

Sent from outer space via my mind

 

[kling-on]

Just kidding its going in the console ... I think I need another 24-12 converter for key power ... So back to eBay I go

Sent from outer space via my mind

 

[kling-on]

Coffee cup hits in second but parking brake clears and the arm rest is perfect

Sent from outer space via my mind

 

[Sully73FJ40]

Looks good! I am going to mount a 40mm ammo can in mine once I get back. I have it sitting on the shelf waiting for install.

 

[subzali]

you scared me for a minute with the cutting the dash comment...

 

[kling-on]

Well the starter died Grrr ordeed a reman fro cruiserpart.net time to wait on UPS back to driving the Fj60

Sent from outer space via my mind

 

[kling-on]

you scared me for a minute with the cutting the dash comment...

Your welcome I hoped it would get someone

Sent from outer space via my mind

 

[pistonpete]

kool rig

Yes, me like, whats the skinny on that turbo ??

 

[kling-on]

Yes, me like, whats the skinny on that turbo ??

Thx man ... I was told it's a Isuzu box truck....top holes are perfect on the manifold the bottoms are off a1/4 in still gettin parts to install it hope to have it on in a few months

Sent from outer space via my mind

 

[Sully73FJ40]

Thanks for the hook up!

 

[kling-on]

Thanks for the hook up!

NO WORRIES LETS SEE PICS

 

[Sully73FJ40]

Just posted a couple pics

 

[kling-on]

Found the rest of the parts I needed for my soft-top ... Also got a starter, both oil pressure senders an a 24 volt reverse light switch... Now I just need to time to install all the parts

Sent from outer space via my mind

 

[kling-on]

Got my 8274 mounted and one if the oil sensors swaped ... One more step closer

Sent from outer space via my mind

 

[kling-on]

Got a starter finally ... Also painted and mounted a fuel door gettin there ... And yes I know I need a repaint someday

Sent from outer space via my mind