Will this engine run?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 20, 2006
Threads
139
Messages
4,041
Location
Pequot Lakes MN
ok... I picked up a 2F for my 74 I am going to completely rebuild the engine... (got the old story, ran before I took it out line :censor: ) just pulled the valve cover off last night... and look at the rockers... what would cause it to bend like this... should I use the rockers off my 1.5F that I have... I know they are good... what would you do???
IMG_0932-1.webp
IMG_0933.webp
 
Here's my guess...#6 exhaust valve broke off and bounced around inside the cylinder until it bumped into #6 intake valve when that valve was trying to open. #6 intake valve could not open so pushrod bent and rocker slid off to side.
What do I win?
What would I do? Pull the head and assess the damage. Then post the pics...
 
Thanks... going to do that this weekend... but is there no way this thing ran....
 
A 2F will certainly run on 5 cylinders...
 
Thanks... going to do that this weekend... but is there no way this thing ran....

Depends on your definition of "Ran"...... I would think the person who sold you this has some splainin to do.....

Good luck....
 
There are easier ways to determine if the valves are bad than pulling the head. Blow some air in the spark plug hole with the valves closed and listen for air coming out the carb, crank case and exhaust pipe. Don't do more work than you have to.
 
All depends on the purchase price. If it was free or crazy cheep, no explination needed.

If you paid $$$ I would invite the previous owner over and have him help you diagnose the problem.


Depends on your definition of "Ran"...... I would think the person who sold you this has some splainin to do.....

Good luck....
 
I paid $500 for the engine and trans.
 
I paid $500 for the engine and trans.


Pull the head, see what kind of damage is in there. If you dropped a valve I might be asking the PO for a few bucks back.....Thats a great price for a complete "running" engine.....
 
A 2F will certainly run on 5 cylinders...

i can also vouch for this....my F engine ran on 4 cylanders for a couple months....
 
Don't pull the head.

It is not worth all the effort if the engine is bad. You can tell if there is something seriously wrong with the engine w/o pulling the head and if it is messed up, take it back as is and get your money back. For that kind of money you should get a good used engine as advertised.
 
but no matter what I get I want to completly rebuild it anyway... so I might as well pull the head... I sent the guy and email... I bought this engine 3 months ago and I am just getting to it now.. of course I lost the guys # so all I have are his email... we will see if he responds...
 
You should be fine. If it sat for a while with no lube this is one of the things you get. That being said.....this happened to mine. I did not tried turning it by hand before I try starting it. Anyhow, I hammered the rod as straitght as possible. It works like a champ. I got some free rods on mud the other day to replace the bent one.
 
like I said I have the 74 1.5 F engine sitting in the other garage and I am pretty sure (correct me if I am wrong) I should be able to use the rockers off that or the whole head if I want right?
 
YOu have to be careful becuase that the year they made changes to the engine. Hopefully someone will chime in or do a search on "2f engine" I think Mace started one that has pretty good info.
 
I am pretty sure like I said that I have the engine after the changes were made
 
Back
Top Bottom