What to do....

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 11, 2005
Threads
19
Messages
120
Location
NC
Allright, as some know I've been working on a resto

https://forum.ih8mud.com/showthread.php?t=41115&highlight=resto+pics

I'm stuck on the damn bodywork...I can't get the rear fenders to be unwavy. I have an aluminium tub and tried getting rid of the weldlines and now I'm fighting the inability to get it straight. So the question is:

1. Do I call it good on what I've got and accept the waves or

2. Do I pay someone to finish the straighting. and paint myself.

I'm running out of energy and just want the damn thing on the roads/trails, but have spent an assload of time working on it and I want it perfect. Any advice?

Oh yeah Money is an object!
 
Well, speaking as someone who's done bodywork for 30 or so years, you aren't gonna get it perfect. If you want it as near to perfect as it can be, pay somebody reputable to do it and do your own paint. There are plenty of techniques for smoothing large flat surfaces, but if you're out of patience, they will only make it worse. Any Junior college bodyshops in the area?
 
yes there are...I'm not tired of techniques I just feel like I am not doing it right. Maybe you can shed some light. It seem as though I put on the filler and sand it all off and put more on and sand it all off etc. I have tried guide coats but I just can't figure it out. I have a manual longboard and a pneumatic one. Any ideas?
 
DON'T GIVE UP NOW! YOU HAVE PUT SO MUCH WORK INTO THIS WHY LIVE WITH A FLAW YOU ALREADY CAN'T LIVE WITH. LONG BLOCK SAND THAT SUCKER ONLY GOOD WAY OF GETTING LONG STRAIGHT PANELS SMOOTH. I WOULD USE ATLEAST A FOOT AND A HALF SANDING BLOCK. IF YOU DO NOT HAVE ONE MAKE IT. OUT OF WOOD OR STEEL JUST PUT GOOD HANDLES ON IT THATS ALOT OF PAPER TO PUSH. ALSO MOST LONG BLOCKS ARE ABOUT 3 INCHES WIDE. ATLEAST THATS HOW THEY SELL THE PAPER. START WITH A HIGH BUILD OF THIN LAYERS OF FILLER THEN WHEN IT SHAPES IN WITH YOUR HIGH SPOT I.E. THE TIG WELD STOP. SHOULD BE PRETTY STRAIGHT THEN. GOOD LUCK MAN BODY WORK IS JUST THAT WORK. HAVING AN EYE FOR IT TAKES ALOT OF TIME, BUT YOU CAN DO IT. SHINY PAINT SURE LOVES TO SHOW WAVES. A PAINT JOB IS ONLY AS GOOD AS THE STEPS BEFORE PAINT.:beer: :beer:
 
I would say throw in the towel and paint it. We're finishing the bodywork on my truck and there are way too many waves in the rear quarter pannels to take out.

I've decided to accept it as part of the truck's character. I'm having professionals work on it and everytime the get something stright something else is out of line.

BTW, you're doing a nice job on the restoration. Looks great!
 
Thank's,


I know your right. I just want to get the beast on the road and have had it sitting for a couple of months because of the heat and humidity. I will keep working it...I have a long board but maybe I'll make a longer one. I do have rolled up paper, so feasible I could make the board up to 100ft long. the longer the straighter. Thanks...sometimes the itch to take the short route begins to overide the sane man
 
Uno,

Are you doing an aluminum tub or steel? I know the steel can be a pain if you've done panel replacement. Keep it up. Also, are you paying or having help?
 
snoozin said:
Uno,

Are you doing an aluminum tub or steel? I know the steel can be a pain if you've done panel replacement. Keep it up. Also, are you paying or having help?

I'm using the orginal steel tub. There was very little rust that needed to be repaired with exception of the rear sil. The remainder of the tub was intact with only surface rust (mostly on passagner side floor board.

I actually paid to get most of the body work done, but the shop owner has let me get my hands dirty. He's been having his guys teach me how to weld, body fill, sand, sand and more sanding, and paint. It's been a great learning experience.

I agree about the large sanding blocks. You have to start with a good coat of body filler then a rough grit of sand paper and work your way down to very fine sand paper to get the form right without any scratches (very time consuming).

I'm actually having problems at the rear quarter pannel with waives. There're right by the front upper side corner of the wheel wells. I've formed it as best as I could, but it will require a lot more body filler to get it perfect. If I use more filler, it would be about 1/8" thick at a flex point which could crack when the body is under stress, ruining a good paint job. I'm at a loss, but who knows I might pull a rabbit out of the hat.
 
Last edited:
I really enjoyed your build up process... just starting mine now.... I have a 74... needs lots of TLC... I was thinging of the aluminum and I like how yours looks... Can not wait to see how it turns out!
 
I feel you pain, I;m having issues in the same exact spot. I figure, what will be will be. I really just need to get over my hate for sanding.
 
I say get it on the road, if youre going to hit the trails its probably going to get its fair share of blemishes anyway. By the way where are you located in NC ?
 
I'm still teetering, but leaning towards working the waves out. I live in Southern Pines.
 
The individual that worked on my 40 used a torch to heat shrink areas on the panel to get the metal to tighten up. It sounds as if you have stretched the panel.
 
be carefull with those stock expansion joints if you make them solid YOUR BODY WORK WILL CRACK. i would not get to thick with the filler if it is that out of wack i would work on the metal first ie the torch or puller to work the metal first you probably do not want to hear that since you already have filler on your panel. also if this truck will se a decent amount of trail all that flexing will have some nice fun with your body work key is seam seal your expansion loints with good body sealent but make sure you do not get your body work close to them and definatly do not go over them with filler or weld them up they were put there for a reason. well good luck and do not get to crazy with it. most waves you will be the only one to notice it , besides your local body man.
 
Well let's hear it Tex

I'm stuck on the damn bodywork...I can't get the rear fenders to be unwavy. I have an aluminium tub and tried getting rid of the weldlines and now I'm fighting the inability to get it straight.

I have the waves too and am willing to put the time in to get them out. So, Tex, let us in on a few trade secrets for trying to get those pesky waves out of those q panels. :grinpimp:
 
Long board and looonnnngggg board. You can use a hand model, or if purchasing air, you want a Hutchins Hustler. Big bucks, but mine is 14 years old and works perfectly. No other sander will hold up under daily use like the Hutchins. The wider surface you can sand at once, the better opportunity you have to get it flat. Learn how to sand with a guide coat. Learn what products to use...and when to use them. You may never get a great result using only body filler...that's where icing, (a modified filler type product) and red putty type products come in. Some sand easier...meaning if you have a small low spot and you fill it with icing, you won't sand the body filler away before the icing is smooth. Go to an autobody paint store and familiarize yourself with some of the products available and their intended usage. Body work is truly an art...and can be agonizinly slow to give a great result. Use a high build primer to fill the smaller imperfections, 2k product type. Time and patience...
 
I had same problem, thought I had long boarded enough but after paint, beige base coat/clear coat, then color sand and buff the waves from the warpage of the mig welding were still there.
If I had it to do over I would have used a LOW GLOSS clear coat and it wouldn't have been as obvious
 
I had same problem, thought I had long boarded enough but after paint, beige base coat/clear coat, then color sand and buff the waves from the warpage of the mig welding were still there.
If I had it to do over I would have used a LOW GLOSS clear coat and it wouldn't have been as obvious

Don't forget the dolly work as well..obviously, get it as flat and straight as possible before starting with the filler, with NO HIGH SPOTS. Low spots can be worked...high ones have to be hammered back, so have none of those from the start. Harbor freight has a nice hammer and dolly set with three different spoons for around 20 bucks. Oh, and your claw hammer doesn't have a flat head!
 
DON'T GIVE UP NOW! YOU HAVE PUT SO MUCH WORK INTO THIS WHY LIVE WITH A FLAW YOU ALREADY CAN'T LIVE WITH. LONG BLOCK SAND THAT SUCKER ONLY GOOD WAY OF GETTING LONG STRAIGHT PANELS SMOOTH. I WOULD USE ATLEAST A FOOT AND A HALF SANDING BLOCK. IF YOU DO NOT HAVE ONE MAKE IT. OUT OF WOOD OR STEEL JUST PUT GOOD HANDLES ON IT THATS ALOT OF PAPER TO PUSH. ALSO MOST LONG BLOCKS ARE ABOUT 3 INCHES WIDE. ATLEAST THATS HOW THEY SELL THE PAPER. START WITH A HIGH BUILD OF THIN LAYERS OF FILLER THEN WHEN IT SHAPES IN WITH YOUR HIGH SPOT I.E. THE TIG WELD STOP. SHOULD BE PRETTY STRAIGHT THEN. GOOD LUCK MAN BODY WORK IS JUST THAT WORK. HAVING AN EYE FOR IT TAKES ALOT OF TIME, BUT YOU CAN DO IT. SHINY PAINT SURE LOVES TO SHOW WAVES. A PAINT JOB IS ONLY AS GOOD AS THE STEPS BEFORE PAINT.:beer: :beer:

Why are you yelling? We can hear you just fine. ;)
 
Back
Top Bottom