Vapor barrier replacements

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

96Cruiser

96Cruiser

10 Year 15 Year 20 Year
Joined
Jul 14, 2003
Threads
38
Messages
629
Location
CHARLESTON WV
guy's , my cruiser is getting ready to get a couple replacement doors [thanks CruiserYard] while the rocker panels are being replaced and while they are being painted to match I will need to replace the vapor barriers after I get it back [I am removing the door panels and the rest of the interior and all that to help with the cost, plus I just want to be the one reinstalling everthing to my liking]

so whats a good place to get the vapor barriers, or a universal maybe, are they available from Mr T? or ?

thanks

doug
 
thanks
 
The other option is to get a roll of concrete underlay plastic sheet from home depot and a couple rolls of butyl tape and make your own.
 
I made my own, and they came out pretty good. Had I thought to call beno, I would have just picked up new ones.
 
My butyl tape was 1/4". I agree, not worth the effort to make your own...but if you need it that day and can't wait, it's an option.
 
YEA, I have had my drivers door apart more times than I care to remember, and last time made one from some sheet plastic that wasn't near heavy enough but was all I could get at the moment, ergo, why I am wanting the real deal.

thanks guys I will see if my local Toyota parts guys can get them and if they balk then Dan or Beno will get the call.
 
NLXTACY said:
Tried that. It sucks.
Click to expand...

Didnt even know you could still buy the OEM vapor barriers...and at $10 a piece that is a deal. I completely destroyed my DS front when doing my window runs and made my own with the home depot plastic. Talk about a PITA.
 
Thanks for posting this. Another thing to add to the list. I need a new job. Ugh.
 
Anyone have the part numbers?
 
Dissent said:
Anyone have the part numbers?
Click to expand...

Stopped in my local dealer today after I got off work, had to pick up the last hard brake line I am replacing on the rear and I asked about these, however my guy says he sees a picture but it doesn't show him a p/n :-(

so if anyone has the p/n's please post them up....otherwise its gonna have to be a pm to Mr Beno.....p/n's for driverside front and rear doors at least, all 4 doors if ya got them :-)
 
Paging @beno. Onur most likely has the part numbers commited to memory. Probably should order them through Onur.
 
67831-60030, just shy of $10... I just put new ones in a few months ago.
 
Rears are 67831-60040
 
You must log in or register to reply here.

Share this page

Back
Top Bottom