Builds The Oddball 80 - Middle East GX Renovation

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Glade Top Missouri Ozarks

IMG_6127.webp


IMG_6124.webp


IMG_6123.webp


IMG_6114.webp


IMG_6102.webp
 
Took a 250 mile trip through southeast Mississippi today checking out some history and backroads with some local Toyota folks
Church Hill
IMG_6667.webp


Zion #2…ghost town of Rodney
IMG_6672.webp


IMG_6670.webp
 
Yucky. Fortunately parts are easy to come buy for the HF1 t-case

The stake nut was loose so I hammered down on it with my impact and got most of the slack out. I can feel a little bit left so I’m going to order a rear bearing
 
The stake nut was loose so I hammered down on it with my impact and got most of the slack out. I can feel a little bit left so I’m going to order a rear bearing
Nice!

Can't do that with the full-time HF2A/HF2AV so part-time for the win :D
 
Get a new nut too! Hope you can save it.

Whats the 8274 going on?
 
OK. Got the parts in to tear into the Tcase.

Turns out someone has been in this thing before and they did not put the proper shims on the output shaft bearing.

I ordered some from Georg. Should be a pretty easy fix with the proper parts.

Got some other parts I want/need to add. Really miss this thing as my daily driver.

IMG_8289.webp


IMG_8285.webp


IMG_8284.webp
 
Pulled this ole girl in the shop and am going to work through some things that have needed addressing

PS has had a weird “hitch” in it. Felt like PS then no PS. Rough through the sweep. Not there when the motor is off and front jacked up so I’m guessing the pump.

Ordered an OEM pump only to discover the 91-92 3FE pump is not the same as the 62 pump. 😩

Had to order a new one (non OEM) from City Racer so that is off the table for now. I don’t think I’ll put the old one back in. I’ll just wait 4 days for the proper part.

So I’m going polish the paint and give the interior a good bath.

IMG_8439.webp


IMG_8438.webp
 

Users who are viewing this thread

Back
Top Bottom