Southeast Overland
Get lost! Go explore!
What he said.
It is very easy. Pick up a 25' roll of fuel line (forget the diameter), about 8 hose clamps, and 3 or 4 breather filters from your FLAPS.
**********Super HAMOM: August 20-21*********
- Thread starter Trollhole
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
What he said.
It is very easy. Pick up a 25' roll of fuel line (forget the diameter), about 8 hose clamps, and 3 or 4 breather filters from your FLAPS.
jfz80
Cruisin’
guys im out 
parts are here and 45 was itching to get to the mtns
turns out the driver will be going in to the shop for repairs friday
parts are here and 45 was itching to get to the mtns
turns out the driver will be going in to the shop for repairs friday
dohcdelsol93
snoogans
on friday i'm coming home to eat dinner with the family then drop off my son at my sisters for the night.
Anyone from S'ville or greenville want to meet up about 7-8 to ride out there
PM me for my number
Anyone from S'ville or greenville want to meet up about 7-8 to ride out there
PM me for my number
can someone pm the address or co-ordinates...YES I have been several times I just don't want to do my typical wrong turn and seach for an hour on the way.
Southeast Overland
Get lost! Go explore!
I'll be up there Saturday morning - wish I could make it Friday but I'm swamped playing catch-up with work.
I'm going to email out the address to the club a bit. I just want to confirm it.
Now is a good time to go to the UC website and update your contact info if you are not receiving email from the club.
dohcdelsol93
snoogans
so is someone bringing a grill? just wondering if i should pick up something for lunch on Sat?
They usually grill saturday i am debating on coming fri. night or saturday.
Edit:
I will be there Sat before lunch. Is there an Aunt Sue's run for lunch this year or? I really wanted to come tonight, but with orientation in Greer, 3 kids in Pickens and my wife in DW I figured I better head back home and get a few things done with only 1 little one around. Especially before the new job starts next week.
I plan to bring a few things I need to get welded and also see if we cannot get my bumper to line up a little better. Other than that I will be there ready to help rebuild some axles.
Last edited:
dohcdelsol93
snoogans
i'm still trying to find some metal pieces for you. Never made it out to my parents place, had to come home early last night and search for hours to get all the paperwork for my motorcycle to sell tonight
Will check at the shop next door again.
on ebay they had some trailer spare tire mounts that were going for about 30-40 shipped. Not sure what they go for at northern tool or harbor freight but if you just get a flat piece of steel you could probably cut the mounting plate off and make a mounting plate for your bed.
Will check at the shop next door again.
on ebay they had some trailer spare tire mounts that were going for about 30-40 shipped. Not sure what they go for at northern tool or harbor freight but if you just get a flat piece of steel you could probably cut the mounting plate off and make a mounting plate for your bed.
If we get email from website when we subscribe to a thread we should be good right?? (contact info i mean)
Southeast Overland
Get lost! Go explore!
If you are talking about email from MUD then no - MUD and UC use two different email lists.
I just don't want to miss directions for tonight. Iwannawagoneer@bellsouth.net And yes i had a wagoneer in the past.
dohcdelsol93
snoogans
i also have not recieved directions but sometimes my Yahoo email likes to send things directly to the trash.
my email is dohcdelsol93@yahoo.com...however PM'ing me the info on here would be much better as i'm on mud all the time....my email...not so much.
my email is dohcdelsol93@yahoo.com...however PM'ing me the info on here would be much better as i'm on mud all the time....my email...not so much.
- Thread starter
- #95
Who is going to be there tonight?
I'll be there tomorrow morning early.
will be there tonight. If i show tommorow it will be after 4pm. Kids bday party at 2:30
gimpy/dohc
Did you get my PM?
Did you get my PM?
I just got home from orientation, I will be there in the morning before lunch, hope to make it by Anderson Jockey Lot in the early am and then on up to alan's place.
If you don't find the metal not problem, I should be able to make a mount up with some flat plate and 3 tubes (Square/round) and 3 wheel studs. I just need to have someone to weld as I cannot. Will discuss design on Saturday and see what everyone thinks. I have enough projects on the pickup as it is to get going, especially with the new job starting soon.
If you don't find the metal not problem, I should be able to make a mount up with some flat plate and 3 tubes (Square/round) and 3 wheel studs. I just need to have someone to weld as I cannot. Will discuss design on Saturday and see what everyone thinks. I have enough projects on the pickup as it is to get going, especially with the new job starting soon.
yep, is 6 too early. Not sure when everyone plans to be there.
