Stock front bumper vent function

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 17, 2018
Threads
7
Messages
235
Location
Erie, PA
Are the stock front bumper vents part of the cooling design? Im looking at after-market front bumpers and wondering.
 
That area behind the bumper would likely develop low pressure at highway speeds without those vents, and that could affect the airflow to the power steering cooler, trans cooler, AC condensor, and radiator. IDK how critical a function it plays as many people have replaced their original front bumpers with aftermarket. Someone would need to make a scale model and take it to wind tunnel to do some air flow studies to answer that question completely.
 
If my ARB bumper with a 12000M winch, plus lights, doesnt cause me airflow problems here in the Phoenix summer's, I would not worry about it. Lots of us are running tons of junk on the front with no overheat issues.
 
I, like@inkpot above, spend a fair amount of my time in Phoenix during the summer. One of my factory bumper Vents is completely blocked by my winch's solenoid box, which is mounted behind my factory bumper, I'm happy to report I've had no problems with overheating over the last 2 years.

1568528840263.png

1568529010444.png

1568528916207.png


1568528765781.webp
 
It's more common to have a bullbar/aftermarket bumper here in Aus than it is to have a stock bumper. Stock bumpers are almost rare! I have never heard of an 80 with cooling problems due to that area being blocked. And it gets pretty hot over here.
 
Aerodynamics.

100% for MPG & downforce at high speeds.

:moon:
 
Back
Top Bottom