Spare Tire Carier

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 7, 2006
Threads
22
Messages
136
Location
Vancouver, WA
Hi, is there anyone in the US that has these or can get them?

b7_1.jpg


ec_1.jpg


I found a guy in Australia selling them but it looks like shipping is a pain for an individual.

Any help would be great.

Thanks, Chris
 
You'd also be limited on size (probably to the stock 30" tire) if you wanted to keep the cover.
 
I was reading that all cruisers could be fitted without the extra plate inside the quarter panel. The guy in Australia said he has had no complaints about this carrier. I don't think that the factory would spend the money to do some quarters with the extra plates and some without, they would stamp them all the same and add them to the ones they want. Alass, I will cross that road when and if I get their, if I get their. I just like the look of them, and I don't want to spend almost 2k on a stinkin rear bumper just to get the tire out from underneath.


I don't like the cover, so that is a non issue.


Anyone Know More??
 
Anyone Know More??

Only that it is not speculation about the additional bracing; that additional bracing is a fact and it is also a fact that US spec vehicles do not have that bracing. If you still doubt these facts then consider that 3rd row vehicles have bracing and brackets for the 3rd row and those without the 3rd row do not have the same brackets and bracing so your assumption/rationale that Toyota would build all bodies with the bracing for a tyre carrier is incorrect.

-B-
 
Ok, my bad. I still think if I could find one in the US I could make it work for less than a new bumper mounted one. :D
 
I still think if I could find one in the US ...

It is highly unlikely that you will find one in the US. None were ever sold in the North America market with that option. You would have to find a JDM (or OZ) import into Canada and somehow get the tyre carrier off that truck and into the US. Not impossible but it would be a challenge. I would start by posting a WANTED listing in the Classified section and maybe they would tolerate a "wanted" post in the diseasel section since most 80s that are imported from Japan into Canada are diseasels.

-B-
 
Good idea, thanks. I think i will have to try that.

I may try and build my own bumper, I did not realize that these are made of unobtaium.

How hard can it be, I know I could build one for less than 2K, with a carrier. Now I just have to find the time to do such a thing.

Who ever thought putting the spare underneath the back, they should be shot. You would never know if it was flat till you took it out to put it on after you got a flat.

Thanks, again.
 
Who makes that? What do they go for $$$???
 
Who makes that? What do they go for $$$???




You'd have to fab one up yourself ;)

Spindle kits with matching bearings go for about $50 bucks (cheaper if you hit your local trailer supply shop) and the rest is just basic fabrication...

I'd say it's much easier than trying to brace a US spec Cruiser for an OEM carrier :doh:


You can also go with a Kaymar carrier, but that's still a bit spendy for my wallet and I don't really care for the look :o

ka11102w.jpg
 
Who ever thought putting the spare underneath the back, they should be shot.

99.9% of all vehicles have the spare underneath or otherwise hidden. The spare tyre is buried underneath all kinds of stuff in the boot and underneath the bed of pretty much every pickup on the road. A few heeps like the Cherokee have it in the cargo area taking up valuable space.

-B-
 
I had a Jeep CJ 7 with the external mount and liked it. I also had a Cherokee that had the tire inside and liked it too.

It looks like I will be hitting up the local trailer supply place here in town.

Thanks.
 
as to the need for bracing: think about the weight of a tire/wheel combo and how that could be -or not- effectively held by the thin gauge sheet metal of the corner area only. Unlikely it would last long. Would you hang a tire on a long lever off the middle of your door, say, held only by a few bolts through the sheet metal?

anyway, if you want the OEM off-the-corner tire mount, you could also PM Mot on the site. He's in Japan, a good guy, and can send you pretty much anything at reasonable cost.
 
Umm, there are other options yunno :cool:


zjz4476Spindle2.jpg

zjz4476Spindle3.jpg

WildYoatsSpindle2.jpg

WildYoatsSpindle3.jpg

zjz4476Spindle4.jpg



I'd much rather sport one of these spindle mounts than the OEM bodymount ;)

Been looking at this for awhile. I have all the hardware. Do you have the specs for the bracket? Anything that will give the next guy a head start will help.

Thanks
 
Hi
I own a 96 LC80 (with factory tire carrier) which I had to rebuild after it was badly damaged in a roll over accident. From my experience looking at part numbers for replacing deferent panel in my 80. I would like to confirm that 80’s with factory tire carrier come with a different (quarter panel) than those without. I can supply part numbers if needed.
The Toyota tire carrier is light, high quality and I have used it with 36-14.5 R16 Interco STS tire. No problem. It is sold at Toyota parts for $400-500
Thx
nader
 
Nader,
Where do you live and where did the truck come from?
-B-
 
Back
Top Bottom