SAS Solid Axle Summit #4 Official Thread 2020 (10 Viewers)

SAS #4 Color Choices


  • Total voters
    61
  • Poll closed .

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

does anybody have a status on when Colorado will open its national forest campgrounds? I was hoping to go up to Grand Mesa above Delta and Montrose and explore those places. Per Jeremiah Proffitt the ones around him are still closed.
I went camping last weekend in Bonanza in the National forest there. I didn't see a soul around us and it was beautiful. Just no fires still.
 
Update from Silverton FB group. Full alpine loop from Silverton to Lake City via Engineer pass and American Basin and Cinnamon back to Silverton.
E4CD6A82-0E8D-4C71-AFAE-54E54063E108.jpeg
DADBD9A3-187A-46E4-BA82-5900D899706D.jpeg
13E623C2-6757-4D13-8083-4E66C149845A.jpeg
BEFD94B7-D805-4172-BC20-D3ABBC8D7936.jpeg
B076BA95-7C07-4B69-A55E-5B7C202E95EA.jpeg
 
@Yackster sorry to hear about this...but we know you can get it done. Get after it and good luck.👍🎯🇺🇸
 
With a recent blown head gasket/compression in the radiator I believe the whole 62 decided to start the LS swap now here’s where I’m at who thinks I can make it

View attachment 2325620

Sounds like the timing was just right.

Get the parts in line and call on some late work nights with friends and anything is possible in a very short amount of time.
 
With a recent blown head gasket/compression in the radiator I believe the whole 62 decided to start the LS swap now here’s where I’m at who thinks I can make it

View attachment 2325620
I did mine in 3 months of weekends and after work a few afternoons a week.

You’ve got it!
 
With a recent blown head gasket/compression in the radiator I believe the whole 62 decided to start the LS swap now here’s where I’m at who thinks I can make it

View attachment 2325620
Update on the progress on engine build/LS swap got the align bore finished,cylinders bored and honed I’ve had the advanced adapters kit for about two years just received the engine overhaul kit and the holly terminator X recently

image.jpg


D6E39CE3-7890-4CD0-9CBF-8586AA9446E0.jpeg


5FA77866-1EE2-402B-8C07-2E695A3E83CB.jpeg


E9B8E58A-9A40-4C0B-9F0C-C14A72D923A6.jpeg


0D6FB0CD-0807-4A8E-856D-DA5306D10E6A.jpeg
 
@Rockymtnreaper we are liking what we are seeing for sure!

Have you heard anything about Imogene?? Asking for a friend. 🆘😂. (@rhah )
 
Last edited:
Maybe at least to the summit soon. T-Ride isn't very open yet. Don't think the snowpack is much of an issue this year.
Yankee isn't listed either.
 
Update on the progress on engine build/LS swap got the align bore finished,cylinders bored and honed I’ve had the advanced adapters kit for about two years just received the engine overhaul kit and the holly terminator X recently

View attachment 2327420

View attachment 2327421

View attachment 2327422
View attachment 2327423
Update: rods reconditioned, rotating assembly weight matched and crank balanced. Should be ready to assemble the short block this evening.

9F80A6AC-3C98-418A-B01C-8EA20D7E0DB8.jpeg


A587D490-A5DB-48A1-B85C-A59C1B884A42.jpeg


247A9A73-5D97-4961-8EDD-A34738329A34.jpeg


C6770950-0148-4096-95DB-40AF40E771C5.png
 
For you folks that don't know @Yackster , Zach has a full service engine shop. When you have the tools and skills you balance and do the trade secrets to your own builds easily. If you need advice or his services he is always happy to help.
 

Users who are viewing this thread

Back
Top Bottom