REPRODUCTION D-Pillar and Front Fender Vents

TRAIL TAILOR

Enabler
Supporting Vendor
Joined
Jun 21, 2011
Messages
16,595
Location
Redding CA
I have gotten these dialed in and they were approved for production this afternoon.

CNC milled from 6061 and will have two finish offerings. Bare and black hard anodized. They will come with new custom EPDM 70 gaskets and 316 stainless steel trim screws.

These are now available for purchase with an estimated shipping date of Nov. 28th . Limited supply.

Here is the final prototype for a teaser pic.

PM me if interested.

Jason

IMG_20181123_173448850.jpg
IMG_20181123_173412797.jpg
IMG_20181123_172904991.jpg
IMG_20181123_172846878.jpg
 
Last edited:

TRAIL TAILOR

Enabler
Supporting Vendor
Joined
Jun 21, 2011
Messages
16,595
Location
Redding CA
Shewwww that is pretty! Don't have a need to order but maybe I will now.

Any plans for the fender vents as well?

Yes, fender vents are in the works now. They will match the D-pillars in appearance and will be about the same pricing and same finishes.

Also, the 60 series AC bezel is at the 3D scanner now and I'll have a CNC mill tool path hopefully by the end of next week. These will also be aluminum and should be available by the end of December.

Jason
 
Joined
Nov 28, 2016
Messages
1,244
Location
Ventura, CA
Yes, fender vents are in the works now. They will match the D-pillars in appearance and will be about the same pricing and same finishes.

Also, the 60 series AC bezel is at the 3D scanner now and I'll have a CNC mill tool path hopefully by the end of next week. These will also be aluminum and should be available by the end of December.

Jason
Rest is for the weak, right? Really look forward to these bits, they look great!
 

NookShneer

GOLD Star
Joined
Aug 4, 2010
Messages
1,508
Location
North of Seattle, WA
Yes, fender vents are in the works now. They will match the D-pillars in appearance and will be about the same pricing and same finishes.

Also, the 60 series AC bezel is at the 3D scanner now and I'll have a CNC mill tool path hopefully by the end of next week. These will also be aluminum and should be available by the end of December.

Jason
Merry Christmas!
 

Major Nelson

SILVER Star
Joined
Aug 20, 2012
Messages
1,146
Location
Seattle, WA
Yes, fender vents are in the works now. They will match the D-pillars in appearance and will be about the same pricing and same finishes.

Also, the 60 series AC bezel is at the 3D scanner now and I'll have a CNC mill tool path hopefully by the end of next week. These will also be aluminum and should be available by the end of December.

Jason
Can't wait for both of these! I think I got one of the last sets of NOS D-pillar vents 4 years ago...this release has knocked some of the bloom off that rose...but man, I do need new side vents and an AC bezel.....are you effin kidding me.....stoked.

Thanks J....they'll go nicely with my lap belt caps you made.
 

morganism

SunkCostFallacy
 
Joined
Jan 17, 2009
Messages
732
Location
Verde Valley, AZ
Very nice work.

Worth it just to buy the seals, they leak down on the connectors inside the D pillar. You gonna make the draft doors that go with it, or are they cut into the edge gaskets ?
 

klinetime574

Positive Vibes
SILVER Star
 
Joined
Jul 23, 2006
Messages
5,419
Location
Chicago, IL
PM sent

I noticed the corners on mine are cracked and paint is peeling. Not gonna be an issue anymore :banana:
 
Top Bottom