Replacement for this alternator?

[sleepycruiser]

Can anyone point me in the direction of a replacement for this? It is in a 1964, but I’m not sure if it is original or not. Getting it tested today after I did my preliminary testing and want to make sure if I need to replace it I get the correct fitting alternator.

Not going to the one wire…going to stay with external voltage regulator.

Thanks FJ40 team!!

 

[B y r o n]

I'd double check with the vendor but this looks like a possibility.

 

[sleepycruiser]

I'd double check with the vendor but this looks like a possibility.

Thanks. I can’t remember the member here that runs that. Anyone recall?

 

[sleepycruiser]

Actually, the alternator tested good….back to the drawing board.

 

[igotta40]

Actually, the alternator tested good….back to the drawing board.

It’s identical to the one in my 1974. If that helps.

 

[3_puppies]

just a heads up,
the belt is either too small for the alt pulley
or
the pulley is too large for the belt

the belt is too far down into the pulley

 

[sleepycruiser]

just a heads up,
the belt is either too small for the alt pulley
or
the pulley is too large for the belt

the belt is too far down into the pulley

Any idea what size I should grab? It is the belt that is squeaking…I spray it with silicon spray and it squeak stopped.

 

[charliemeyer007]

This might be your belt.

1962-1966 Toyota Land Cruiser Accessory Drive Belt - Dayco 17430 - Fan and Generator - PartsGeek.com

Buy 1962-1966 Toyota Land Cruiser Accessory Drive Belt Fan and Generator Dayco for a low price of $15.97 at PartsGeek. FLAT RATE SHIPPING on most Dayco 17430 orders.

www.partsgeek.com

 

[3_puppies]

sprays are a band aid

belts drive on the "V" sides, the belt in the alt pulley is bottomed out, not on the sides anymore
wrong pulley?
worn belt?
wrong belt?

the belt looks good in the water pump pulley, can't tell on the crank pulley,
maybe the water pump pulley is wrong versus the crank and alt??
all 3 pulleys should be the same size groove with a matching belt


not to be a downer but you should also replace the metal 4 blade fan, they will break:

near disaster

a customer calls me from the interstate, asks if he can have his rig towed to my place. He was doing about 55mph, heard a loud bang and vibration. Opened the hood, fearing the worst, and found this. He is extremely lucky as it didn't take out the radiator as others have experienced. Mark A has...

forum.ih8mud.com

 

[sleepycruiser]

sprays are a band aid

belts drive on the "V" sides, the belt in the alt pulley is bottomed out, not on the sides anymore
wrong pulley?
worn belt?
wrong belt?

the belt looks good in the water pump pulley, can't tell on the crank pulley,
maybe the water pump pulley is wrong versus the crank and alt??
all 3 pulleys should be the same size groove with a matching belt


not to be a downer but you should also replace the metal 4 blade fan, they will break:

near disaster

a customer calls me from the interstate, asks if he can have his rig towed to my place. He was doing about 55mph, heard a loud bang and vibration. Opened the hood, fearing the worst, and found this. He is extremely lucky as it didn't take out the radiator as others have experienced. Mark A has...

forum.ih8mud.com

Thanks…I’ll check all that out. What fan do you recommend?