regarding interior panels

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

P

peiserg

10 Year 15 Year
Joined
Mar 5, 2008
Threads
72
Messages
249
Guys, i have a 12/1973 FJ55. I found a place that makes a full set of brand new interior panels (havent received yet, but the stuff they make for other vehicles looks legit) called SMSHEADLINERS. The guy asked me if i needed the 5 inch or 9 inch fuel filler cut out in my set. I'm not sure. anyone have any insight? Terry Bowen was kind enough to send me a photo of the rear interior panel on the fuel filler side and it appears that there is a slight outward bulge of the interior panel where i presume the fuel filler nozzle travels downward.

if it turns out this guy (SMSHEADLINERS) makes good stuff i'll post it here so you all can benefit.

thanks gerry
 
@greenbeast has a set in grey
I have a set in black. I eliminated the ash trays.

That’s @Cruisers and Co pointing to where the sub goes.

IMG_8157.webp


IMG_8156.webp


IMG_8155.webp


IMG_8158.webp
 
peiserg said:
Guys, i have a 12/1973 FJ55. I found a place that makes a full set of brand new interior panels (havent received yet, but the stuff they make for other vehicles looks legit) called SMSHEADLINERS. The guy asked me if i needed the 5 inch or 9 inch fuel filler cut out in my set. I'm not sure. anyone have any insight? Terry Bowen was kind enough to send me a photo of the rear interior panel on the fuel filler side and it appears that there is a slight outward bulge of the interior panel where i presume the fuel filler nozzle travels downward.

if it turns out this guy (SMSHEADLINERS) makes good stuff i'll post it here so you all can benefit.

thanks gerry
Click to expand...
Here's the whole history. There might some information on the different fuel filler cut outs in this thread.

tucker74

Thread 'FJ55 reproduction door panels'

So I've been working on a little project for my '79 FJ55, trying to get rid of the awesome carbon fiber and suede door panels the PO saw fit to install. I had picked up a set of stock '79 door panels in hopes of covering new boards with the stock stamped vinyl. Well, long story short the vinyl wasn't in good enough shape once I got them so they sat in a pile collecting dust for a year or so. A few weeks ago I saw a post in the 70 Series forum where a guy was converting his BJ74 from RHD to LHD, he had some custom panels made to switch the front door controls. I PM'd him and got the...
  • Like
 
You must log in or register to reply here.

Share this page

Back
Top Bottom