Pics of 33's with a 2.5-3" Lift

[brian]

285/75/16 bfg ats ome heavies with a 30mmspacer in the fronts.

285/75/16 bfg ats with saggy oems.

 

[raynyc]

i like ! 2 questions about your grapplers .
1. how is the sidewall firmness for driving on the road
2. what tire pressure do you run for road

thanks in advance

View attachment 750392

34" 285/75-17 on OME 850/860. Couldn't be happier.

 

[andhop72]

I was in the same boat as you and am so glad I went with 35s.

2.5 in lift and 35s.

 

[smug01]

The sidewall is fine for daily driving on-road. No issues with too much flex. As for the pressure, I just run 32 psi but was not very scientific about it. I like the somewhat skinny look compared to 315's, but that is just a personal preference thing.

i like ! 2 questions about your grapplers .
1. how is the sidewall firmness for driving on the road
2. what tire pressure do you run for road

thanks in advance

 

[Mr Cimarron]

Not the best photo but all I had online at the moment. 285/75 MTRs with OME 2.5.

 

[Rusco]

305/70-16 KM2s, 2" OME.

 

[tfree]

I like the stock height. Not going rock climbing it looks tuff.

 

[mfuss]

I'm sitting at Goodyear putting 305/70r16 MT/Rs on mine with stock suspension right now. I'll post up pics in a couple of hours

 

[MARKTLC80]

Here is mine with 285's BFG's and Medium 2.5 inch OME suspension.

 

[OverLand Cruisers]

285/75 K02s, OME 860/865 combo.

 

[2000cruiser]

295 70 17 on 2.5 OME heavies, stink buggy for now. Rear inside is completely gutted and waiting for the rear bumper. I’m definitely going at least 35s soon- anyone in the Seattle area looking for some 295s with less than 1000 miles on them?

 

[gixxerjasen]

Lazrus, come forth!

 

[brian]

and the sea shall give up her dead

 

[gixxerjasen]

What is dead may never die

 

[Trusty Rusty]

Bumping this thread for some more pics!

 

[renago]

Against all I would suggest 265/75/16 , very good rubber on the tar road .
If off roaring go skinny 255/85/16 .
Truck will be much more reactive then the big and fat tires .
Just my 2 cents

 

[thabruiser]

I had 315/75/16's with the OME 2.5 lift. IMO the 35's (General Grabber A/T) fit the lift and 80 perfectly.

 

[MUDZLLA]

 

[mjosoba]

I’ll prob be the minority here, but I’m going from 315’s to 255’s. Not a huge difference, but smaller in height and width. Better for my needs. I’ve got a 2.5” lift now, but want to do the 1.75” Dobinsons VR soon.

 

[NorthWA]

305/70/16 BFG A/T’s with Dobinson stock height VR springs and 30mm spacers. About 2 inches over stock.