Parting Out 1995 FZJ80

[landcruiserjunky]

complete antenna?

 

[Cruiser Man]

Broke

 

[Hokie Fan]

May be interested in lift. What type and how many inches? How many miles on lift?

 

[Cruiser Man]

FOR Gen II 3.5"

This is FOR's Gen II kit that yields aprox. 3.5" of lift over stock. I had just installed this lift not too long before the accident. It had maybe 1,000 miles on the lift. One of the shocks got bent in the accident but easily replaced from Frankie's Offroad.

May be interested in lift. What type and how many inches? How many miles on lift?

 

[Bluetribal]

I could use the wire harness that goes across the back under the truck from DS to PS. Don't Ask!
It looks as though you can un-plug on both ends inside the cab behind the side panels. Here are some pics for reference.

Wire harnes going into PS does the same on the DS

You can see it runs below the rear cargo floor just above the rear cross memember.

A pic behind the plastic panels of where to disconnect it.
Driver Side

Passenger Side

I hope you can help me out with this because although I repaired 10 of the 20 wires in this harness I hacked after drilling through the floor and hitting them a nice clean stock one would give me peace of mind.

 

[egmp]

Interested in the steering wheel. Thanks

 

[ardentyota]

Ignition Cylinder with ignition switch pigtail and all lock cylinders/keys (D + P doors and rear hatch).

Email/PM Sent.

 

[Eric Hohlfelder]

Did you have bumpers or sliders on it? I also could use the passenger side factory running board rear plastic end cap only. Let me know. Thanks.

 

[landcruiserjunky]

Broke

Is the 'cord' that pulls/pushes the mast available?

 

[grayfj40]

Interested in the birfields, PM sent.

 

[Truckasaurus]

PM sent.

Thanks!

 

[Bluetribal]

You guys might want to send e-mails check the first post.

 

[Cruiser Man]

All PM's emails replied to!!

Thanks

 

[Cruiser Man]

I have replied to all emails /PM's but if for some reason I have not responded to you please let me know.

Thanks

 

[charlestonfj60]

I will resend my email. thanks

 

[Bluetribal]

Cruiser Man, just checking on the status of the wire harness. Payment was sent 3/30/10 just hoping you were able to disassemble the truck this past weekend.

 

[Tapage]

I'm looking for this part ..

https://forum.ih8mud.com/wanted-parts/374898-speedo-t-case-sensor-harness.html

thanks !

 

[Cruiser Man]

Cruiser Man, just checking on the status of the wire harness. Payment was sent 3/30/10 just hoping you were able to disassemble the truck this past weekend.

I have the wire harness pulled and will ship tomorrow.

Thanks

 

[Bluetribal]

Right on, thanks for the status update.

 

[Tapage]

remember me Patrick !