Our '87 4R SR5 Honduras Coffee/Missions Rig Build...

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

This? Note this is not mine, Internet search.
ImageUploadedByIH8MUD Forum1440463454.339216.webp
 
Yup that's it, it lives above the right kick panel, you can see it if you remove the right speaker grill in the dash and pop out the speaker. You can sometimes hear it click on and off when you start and shut off the engine, it is the relay that turns on the fuel pump. Mine has been clicking on and off rapidly while going down the road.
 
This? eBay
I'll buy it for ya in exchange for those other goodies. Let me know what you think.
 
Console and seats are in! Looked up front to discover something missing! Time to rebuild steering arms???

ImageUploadedByIH8MUD Forum1440860396.177898.webp

ImageUploadedByIH8MUD Forum1440860406.735745.webp

ImageUploadedByIH8MUD Forum1440860416.038409.webp

ImageUploadedByIH8MUD Forum1440860424.642066.webp
 
Think I saw on 4crawler.com bronze bushings for idler arm. Just thought I'd throw that out. I frequently bent idler arms when I had small torsion bar lift. I've read that replacing the plastic bushings with bronze is the fix but weren't available at the time as Downey was out of business.
 
^ Thx!
I looked on his site and boy it's hard to understand. I may need to contact him and see if he can direct me. Thanks for the idea!

EDIT: Found it... Toyota IFS Idler Arm Upgrades
 
Last edited:
Interior is looking really nice. What center console did you settle on?
 
My best bud!

ImageUploadedByIH8MUD Forum1441412134.940703.webp

ImageUploadedByIH8MUD Forum1441412156.804001.webp
 
Made my door hinges with quick release pins.
ImageUploadedByIH8MUD Forum1441658024.262496.webp

ImageUploadedByIH8MUD Forum1441658037.586376.webp

ImageUploadedByIH8MUD Forum1441658061.780826.webp
 
Started on the bumpers finally! I'm starting with the rear as it should be easier. I'm going to add a good amount of support to their design. I think it will turn out nice when done, plus I'm adding a swing out. When both are done I'll have them sand blasted and powder coated.
ImageUploadedByIH8MUD Forum1442255322.757442.webp

ImageUploadedByIH8MUD Forum1442255337.160936.webp

ImageUploadedByIH8MUD Forum1442255350.468611.webp
 
Close!
ImageUploadedByIH8MUD Forum1442345990.068426.webp
 
DONE for today at least! Build pics to come.
ImageUploadedByIH8MUD Forum1442363716.626456.webp
 
ImageUploadedByIH8MUD Forum1442369572.776483.webp

ImageUploadedByIH8MUD Forum1442369586.163427.webp

ImageUploadedByIH8MUD Forum1442369603.606003.webp

ImageUploadedByIH8MUD Forum1442369615.433003.webp

ImageUploadedByIH8MUD Forum1442369626.997604.webp

ImageUploadedByIH8MUD Forum1442369641.071380.webp

ImageUploadedByIH8MUD Forum1442369653.394648.webp

ImageUploadedByIH8MUD Forum1442369673.921744.webp

ImageUploadedByIH8MUD Forum1442369686.560054.webp

ImageUploadedByIH8MUD Forum1442369697.452521.webp

ImageUploadedByIH8MUD Forum1442369707.657284.webp

ImageUploadedByIH8MUD Forum1442369717.943343.webp

ImageUploadedByIH8MUD Forum1442369728.214640.webp

ImageUploadedByIH8MUD Forum1442369757.654902.webp

ImageUploadedByIH8MUD Forum1442369767.734981.webp
 
Anyone know where to get this?
ImageUploadedByIH8MUD Forum1442450601.465941.webp
 
Starting on the front now! It's a love/hate relationship sometimes. :D
ImageUploadedByIH8MUD Forum1442698237.311498.webp
 
Can I do a solid axle swap and keep my automatic transmission?
 
Back
Top Bottom