Open Source GX460 Drawer System (DIY) (1 Viewer)

[WTITW]

Can’t really tell truck orientation from your drawing but looks like you have cross bars going perpendicular to the direction of loading. Might become an issue with drawers as stuff drags across those. Thats why I opted for top supports parallel to truck orientation.

Caps

10 SERIES – BLACK PLASTIC END CAP W/PUSH-IN(S) – BLANK | TNUTZ

Here are the sizes available and 100% equivalents to other manufacturers: EC-010-A – 1” x 1” w/one push-in - 80/20 #2015-PLAIN, T-SLOTS #655000, Frame-World #11-250 EC-010-B – 1” x 2” w/two push-ins - 80/20 #2025-PLAIN, T-SLOTS #655010, Frame-World #11-257 EC-010-C – 2” x 2” w/four push-ins -...

www.tnutz.com

1x1. NOT 1x1qr (quarter round)

 

[WTITW]

@Littlehouse

 

[Littlehouse]

Can’t really tell truck orientation from your drawing but looks like you have cross bars going perpendicular to the direction of loading. Might become an issue with drawers as stuff drags across those. Thats why I opted for top supports parallel to truck orientation.

Caps

10 SERIES – BLACK PLASTIC END CAP W/PUSH-IN(S) – BLANK | TNUTZ

Here are the sizes available and 100% equivalents to other manufacturers: EC-010-A – 1” x 1” w/one push-in - 80/20 #2015-PLAIN, T-SLOTS #655000, Frame-World #11-250 EC-010-B – 1” x 2” w/two push-ins - 80/20 #2025-PLAIN, T-SLOTS #655010, Frame-World #11-257 EC-010-C – 2” x 2” w/four push-ins -...

www.tnutz.com

1x1. NOT 1x1qr (quarter round)

Where the drawing says 7.5”, that is facing the rear of the GX. There is only a cross bar on top so loading should be smooth. Nothing perpendicular on the load floor until you hit the back of the platform. Thanks! Time to order.

 

[r2m]

@Littlehouse

Off topic, but haven't seen a video from you lately.
Guess you've been too busy to "Waste Time in the Woods"?

Now, back to the regularly programmed tread.

 

[WTITW]

Guess you've been too busy to "Waste Time in the Woods"?

Trailer, kids, job, life : ) I'll get back to it.

 

[r2m]

Trailer, kids, job, life : ) I'll get back to it.

Sorry, had to laugh at your listing of priorities:

1. Trailer
2. Kids
3. Job
4. Life

I'm sure it was a Freudian slip and unintentional.