Gotta beware of those interted guys from Richmond. Dibbs on the roof rack if it fits. What is a good day come up and test fit? You home in the evenings? Today would even work if your free.
Official ONSC member buying/selling thread (11 Viewers)
- Thread starter southerncruiser62
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
"Smart"phone sometimes can make me look not so smart (not that I need any help doing that).
Today's a no-go, tomorrow should be fine. Or, if you want to save yourself the drive Johhny and I can give it a look on Moonshine and go from there. Totally up to you. You got my digits?
R
No digits. PM me cause tomorrow works. I don't mind the drive. I like leaving southern pines all the time to do fun and interesting things. Also Kenny was hoping I could grab the cooker and bring it closer to him. Does that thing have a 2" ball hitch?
2 inch balls thought u were a ball expert cowboy butts?
Yeah, it's a 2" ball...
I have one of the club tanks, and the non-stickered one is mine...
alk747triodad
SILVER Star
No problem John. I gonna either put them on NC 4x4 or just stash them also at the barn. Maybe let someone with more knowledge than me see if my tread guess is in the ballpark!
I know a guy that is wanting to sell his roof rack. It's the basket only . Fit on Yakima rack but he is keeping the rails so its the basket only. He wants $50 for it. It came off an 80. Could use new paint. Located in oak ridge nc north of greensboro. Let me know if interested
Any of you Charlotte guys seen this around?
http://www.nc4x4.com/forum/index.ph...rockjock-60s-built-by-all-pro-offroad.128840/
Same guy has a SUPER nice Taco for sale too.
$50K for both...
http://www.nc4x4.com/forum/index.ph...rockjock-60s-built-by-all-pro-offroad.128840/
Same guy has a SUPER nice Taco for sale too.
$50K for both...
The guy just trades his koh rig for the 40 and taco, I don't even think he has them in his possession yet...
Non of those pics are taken in charlotte, those are all south west style housing developments.
It's been in a few magazines though.
Don't know if he will find a buyer over here though there just isn't the facilities to use it at like there is out west to justify the price
That's the main reason No-limit offroad moved out west from Harrisburg.
It's been in a few magazines though.
Don't know if he will find a buyer over here though there just isn't the facilities to use it at like there is out west to justify the price
That's the main reason No-limit offroad moved out west from Harrisburg.
1997 fzj80
Back up for sale. Really need to sell to get a crew cab truck for work.
1997 Land Cruiser, Landcrusier, FJ80, FZJ80
MUD price $5000
Specs.
1997 not Collector Edition
All black - no chrome hardware
Factory Locked Front and Rear- has always engaged quickly
Added Center Diff Switch
195,000 miles
Stock otherwise.
Things Ive done since I bought it in Dec. 2009
Front axle rebuild with new rotors and pads, marlin crawler seals
New denso wires, plugs, cap, rotor, factory air filter, factory oil filter
Replaced valve cover gasket and spark plug seals.
new factory belts.
Replaced antenna mast
New Distributor gasket
New oil cap (dont ask)
ALL new 555 tie rod ends (needs alignment)
pioneer speakers
fan clutch rebuild
new cap and gear in both front seats
New Battery- Jan. 2012
Sept 2012- New ac compressor, dryer, expansion valve
Things I know it needs
-hasnt been aligned since tie rods were replace.
-rear windshield washer diverter valve
-Oil pump cover leaking
This is my daily driver. Still have a frankies lift that will be for sale seperattly if anyone is intersted in it (will make a package price too). This is a solid truck, Ive driven to OBX, WV, and the beach several times. It has some scratches, some paint coming off the hood and the typical leather issues, tear on driver seat etc. There is a stain on the passenger carpet, but i have a pristine front carpet to replace it.
Back up for sale. Really need to sell to get a crew cab truck for work.
1997 Land Cruiser, Landcrusier, FJ80, FZJ80
MUD price $5000
Specs.
1997 not Collector Edition
All black - no chrome hardware
Factory Locked Front and Rear- has always engaged quickly
Added Center Diff Switch
195,000 miles
Stock otherwise.
Things Ive done since I bought it in Dec. 2009
Front axle rebuild with new rotors and pads, marlin crawler seals
New denso wires, plugs, cap, rotor, factory air filter, factory oil filter
Replaced valve cover gasket and spark plug seals.
new factory belts.
Replaced antenna mast
New Distributor gasket
New oil cap (dont ask)
ALL new 555 tie rod ends (needs alignment)
pioneer speakers
fan clutch rebuild
new cap and gear in both front seats
New Battery- Jan. 2012
Sept 2012- New ac compressor, dryer, expansion valve
Things I know it needs
-hasnt been aligned since tie rods were replace.
-rear windshield washer diverter valve
-Oil pump cover leaking
This is my daily driver. Still have a frankies lift that will be for sale seperattly if anyone is intersted in it (will make a package price too). This is a solid truck, Ive driven to OBX, WV, and the beach several times. It has some scratches, some paint coming off the hood and the typical leather issues, tear on driver seat etc. There is a stain on the passenger carpet, but i have a pristine front carpet to replace it.
Last edited:
Barnes, I have the perfect crew cab truck if your interested. I wish I could offer a partial trade but I need to pay off the loan I have against the truck. It's a 2003 F250 diesel fx4 crew cab, black with tan leather interior, fully loaded. It's in really nice shape and I love it but I have no current use for it. Aside from that, how much you asking for the lift kit? My boss has an LX450 that needs a boost. How much lift will it provide?
Thanks mike but im a chevy truck guy. Lift will not be for sale until after truck is sold. but its a 3 inch lift with progressive rate coils. Designed to run 315/75/16 tires.
ST8ROCKS
Kevin
Free body parts!!!
FJ80 body parts that is...
Had these sitting around and now they are going to get tossed. Parts are in great shape.
beer: donations greatly appreciated)
-All 4 doors, still 100% complete with glass and motor, brown leather interior door panels. (24oz PBR per door, or take them all for a 12 pack!!)
-Rear hatch glass (12 pack PBR)
-Front fenders, flares are gone... (12 pack PBR per fender)
Located in Wendell NC. I will be tossing them Thanksgiving weekend. Don't PM me, just call or text nineonenine-2onenine-430four.
FJ80 body parts that is...
Had these sitting around and now they are going to get tossed. Parts are in great shape.
beer: donations greatly appreciated)-All 4 doors, still 100% complete with glass and motor, brown leather interior door panels. (24oz PBR per door, or take them all for a 12 pack!!)
-Rear hatch glass (12 pack PBR)
-Front fenders, flares are gone... (12 pack PBR per fender)
Located in Wendell NC. I will be tossing them Thanksgiving weekend. Don't PM me, just call or text nineonenine-2onenine-430four.
That looks like first cruiser I ever had. Mine had 2 inch lift and side steps. That was way back in 1995. When the LC addiction began for me. 
Does anyone know of a u-pick junk yard that has any 80 series? I need a few parts and crusierparts.net is killing. I found one guy selling the flair piece I need for cheap, but he said UPS is asking almost $120 to ship it : 0 - so I am looking closer to home....
PS anyone have a small lift for a FZJ80 they are selling?
thanks.
PS anyone have a small lift for a FZJ80 they are selling?
thanks.
jfz80
Cruisin’
What parts do you need?
I have just a few remaining from a partout
If you can find Emmas truck (havent followed that saga) it has a lift on it at a yard, doesnt sound promising to get good parts off of though.
Keep an Eye on Barnes thread... he has a FOR lift he will sell once the truck is sold (if its not part of the deal)
there is a white 80 on clist in tn with a lift on it and blown motor for 800 (price of a lift) if your feeling adventurous
I have just a few remaining from a partout
If you can find Emmas truck (havent followed that saga) it has a lift on it at a yard, doesnt sound promising to get good parts off of though.
Keep an Eye on Barnes thread... he has a FOR lift he will sell once the truck is sold (if its not part of the deal)
there is a white 80 on clist in tn with a lift on it and blown motor for 800 (price of a lift) if your feeling adventurous
