Ok $62.95
Official ONSC member buying/selling thread (5 Viewers)
- Thread starter southerncruiser62
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Yukon LX,
I am seriously interested and have trade material and $$ if we can work it out. First item for barter is HK USP 45 with accessories including expanded magazine (zombies, you know), holsters, etc,,,will send you pm to see if we are close to aligning. Other sidearms in 45 also available - as well as a few other long arms. Also maybe a receiver mount winch with Anderson connector (never used once assembled and built).
Mike
I am seriously interested and have trade material and $$ if we can work it out. First item for barter is HK USP 45 with accessories including expanded magazine (zombies, you know), holsters, etc,,,will send you pm to see if we are close to aligning. Other sidearms in 45 also available - as well as a few other long arms. Also maybe a receiver mount winch with Anderson connector (never used once assembled and built).
Mike
My 80 has sold and is on its way to wv. I hope she serves her new owner as well as she served me.
Frankie's lift is now for sale ill post specifics later. I also have a Great Lakes water jet oba kit. Brand new in box with all accessories. This is the same kit Greg has on his 80
Frankie's lift is now for sale ill post specifics later. I also have a Great Lakes water jet oba kit. Brand new in box with all accessories. This is the same kit Greg has on his 80
dibs on the OBA, please, PM on the way...
I am interested in the lift depending on the height.
Oba kit sold. Thanks Jerry
Wanted: 100 series front carrier bearing
Looking to put a Toyota Supra limited slip in my 90 pickup. As part of the instillation, I need one set of carrier bearing / races from the Supra or the front end of a 100 series LC (They are in fact the same part number). I've got the bearing but missing the races from my ebay purchase.
I was hopping someone on here with a 100 series had one left over from an ARB install.
Location: Boone
Looking to put a Toyota Supra limited slip in my 90 pickup. As part of the instillation, I need one set of carrier bearing / races from the Supra or the front end of a 100 series LC (They are in fact the same part number). I've got the bearing but missing the races from my ebay purchase.
I was hopping someone on here with a 100 series had one left over from an ARB install.
Location: Boone
WANTED: FJ60/FJ62 front or rear driveshaft, or FJ80/FZJ80 rear driveshaft.
Needs to have a good slip joint. Using for a hybrid driveshaft build. U-joint condition not important.
EDIT:
FZJ80 rear driveshaft would also work well
Needs to have a good slip joint. Using for a hybrid driveshaft build. U-joint condition not important.
EDIT:
FZJ80 rear driveshaft would also work well
Last edited:
PM sent
I have a great gas saver for sale. 2002 Honda civic.
Here the clt Craigslist ad.
http://charlotte.craigslist.org/cto/3393991199.html
Here the clt Craigslist ad.
http://charlotte.craigslist.org/cto/3393991199.html
Anyone have a sandblast cabinet that they either arent using or want to sell?
jfz80
Cruisin’
two sets of black steelies
(4) 15 x 10 pacer brand black steelies 2.5'' bs $100
(5) 17 x 9 Marsh racing wheels 3.5'' bs $250
1 37'' spare tire 1/4 tread slight cupping cooper discover stt $50 $75 on one of the above wheels
(4) 15 x 10 pacer brand black steelies 2.5'' bs $100
(5) 17 x 9 Marsh racing wheels 3.5'' bs $250
1 37'' spare tire 1/4 tread slight cupping cooper discover stt $50 $75 on one of the above wheels
S4Cruiser
SILVER Star
I have one. PM me for details.
My bossman has decided to put his 96 locked LX450 up for sale. He barely uses it and now needs to replace it with a full size truck - hopefully mine - to pull his race cars and for his wife to transport horses. It's all stock with factory lockers and LX450 front seats. Tan in color throughout. Everything works mechanically except the driver side power window motor needs to be replaced. I'll post some pics later after I wash it. Asking $6250 and willing to split up into reasonable payments with an ONSC member. Holla if interested. This is a great truck to start a build.
jfz80
Cruisin’
Selling my 1978 FJ40
*******SOLD*******
Hi Guys,
I have decided that it is time for me to sell the FJ40, it has been sitting with very few exceptions for the past 2 years aside from the occasional run around the neighborhood. I really hate to see her go, but I am spending all my time with my daughter at the horse farm and riding my bike, would love for someone in the club to get her.
Please call me if interested at the number below.
1978 FJ40 - Olive Brown:653, 34x10.50x15 SS LTB's, Manual steering, Aussie locked rear.
Here are some links to peruse.
When i bought her
How she looks with top off now.
http://i260.photobucket.com/albums/ii17/bflanary/Misc-1/IMG_8176.jpg
New clutch install with new input shaft seal, rear main seal, oil pan+ repaint
Hell Creek 4" lift install
WARN 8274 refresh and new bumper
Price: $10,500 with lots of extra parts.
Original jack, rear step, door straps for when doors are off, 2 spare OEM wheels, spare steering column, spare drive shafts, new in box 1" lift shackles, elec. distributor, etc.
Price: $11,500 with new in the box OEM replica 7-window black canvas soft stop by OCD and new OEM replica soft top bows from Eshan.
Brad 919.656.4682
*******SOLD*******
Hi Guys,
I have decided that it is time for me to sell the FJ40, it has been sitting with very few exceptions for the past 2 years aside from the occasional run around the neighborhood. I really hate to see her go, but I am spending all my time with my daughter at the horse farm and riding my bike, would love for someone in the club to get her.
Please call me if interested at the number below.
1978 FJ40 - Olive Brown:653, 34x10.50x15 SS LTB's, Manual steering, Aussie locked rear.
Here are some links to peruse.
When i bought her
How she looks with top off now.
http://i260.photobucket.com/albums/ii17/bflanary/Misc-1/IMG_8176.jpg
New clutch install with new input shaft seal, rear main seal, oil pan+ repaint
Hell Creek 4" lift install
WARN 8274 refresh and new bumper
Price: $10,500 with lots of extra parts.
Original jack, rear step, door straps for when doors are off, 2 spare OEM wheels, spare steering column, spare drive shafts, new in box 1" lift shackles, elec. distributor, etc.
Price: $11,500 with new in the box OEM replica 7-window black canvas soft stop by OCD and new OEM replica soft top bows from Eshan.
Brad 919.656.4682
Last edited:
@ mike.....whats the mileage and does it have the third row?... and is the sound system still good?
I am interested
I am interested
206k miles. Head gasket was replaced by PO who is somewhere here on Mud. Factory speakers in perfect working order but the original stereo was replaced with a Scion factory stereo which works just fine. Oh, and its the two tone tan/brown.
That 40 is awesome.
