Official ONSC member buying/selling thread

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

mcmarshing said:
i have a good friend who has been looking for a year for a troopy. he comes back in town in 2 weeks but i forwarded a screenshot of the ad to him and is interested.
Click to expand...
For what it's worth, @seanroe1 let me check out his Troopy and it's pretty darn slick with the poptop. If I was in the market for a clean Troopy, it would be hard to pass up either of these rigs. I just really want an LX570 and I can't operate a manual with my pinky in the air.

1780422410922.webp
 
Does anyone have interest in this ‘81 FJ60 body and frame before I part it out?

I’m keeping the drivetrain.

Rear of body shell is rusty.
Doors appear pretty good.
Hood is good except for one hinge mount.
Front fenders are pretty good.
Windshield is good.
Interior is decent.

Only parts missing (other than drivetrain) are tailgate, grill, rear quarter glass, and rear lift gate glass.

Located in Mebane, NC currently. Open to offers.

IMG_1668.webp
 
studawg said:
The vehicle is not able to be sold yet because we are still working on getting the title transferred into Dave's wife's name, so I was just waiting on that before I started posting it. Hopefully wont take too long, but you never know when dealing with the DMV, govt, etc....!
Click to expand...
i believe my good friend wes messaged you with regards to seeing it whenever he returns. super great guy, i’ve known him for a long time.
 
I have a Victron 12V, 375W Inverter and a 12/12 18A Isolated DC/DC Charger from my Troopy that I have no use for. I don't think the Inverter was ever installed. Asking $60ea or $100 for both.

Also, I'm looking for OME 2721 rear coils for a 200 if anyone has one laying around.

2026-06-02 20.42.51.webp
 
mcmarshing said:
I have a Victron 12V, 375W Inverter and a 12/12 18A Isolated DC/DC Charger from my Troopy that I have no use for. I don't think the Inverter was ever installed. Asking $60ea or $100 for both.

Also, I'm looking for OME 2721 rear coils for a 200 if anyone has one laying around.

View attachment 4152694
Click to expand...
I'll bite on the inverter and dc/dc charger. PM inbound
 
FJ62 front axle housing, rear axle shafts and brake drums. Very clean parts

I also have an FJ62 rear housing but my buddy is using the center section to built a centered 9.5". But I know someone in the past mentioned they wanted the brake backing plates.

Bought to swap the front axle in my
40 but have changed plans.

Going to GSMTR and happy to bring. Posted before and never followed through.

$100, located in Mauldin, SC

IMG_9877.webp




IMG_9879.webp


IMG_9880.webp


IMG_9876.webp
 
Hannibal Safari roof rack is still available!
1780749773501.webp

1780749820551.webp
 
They are silver, white, red, bronze. They are LC body panels, they will take any color paint you wish to spray at them.

Make me an offer I can't refuse. Please send PM if interested.

3- 80 doors, LF,RF,RR
3- 60 doors
1- 60 hood
1- 80 hood
1- 60 LF fender
2- 60 RF fenders
1-80 tail gate
2-sets 60 inner fenders

I also have a bunch of radiators, Lots of bearings, drive shaft flanges, sway bar link parts on and on. I am thinning out all of my Land Cruiser parts. I'll eventually list all. If you want to come look through everything, I'll be here.
 
R.K. said:
Does anyone have interest in this ‘81 FJ60 body and frame before I part it out?

I’m keeping the drivetrain.

Rear of body shell is rusty.
Doors appear pretty good.
Hood is good except for one hinge mount.
Front fenders are pretty good.
Windshield is good.
Interior is decent.

Only parts missing (other than drivetrain) are tailgate, grill, rear quarter glass, and rear lift gate glass.

Located in Mebane, NC currently. Open to offers.

View attachment 4152274
Click to expand...
More pics

IMG_2524.webp


IMG_2525.webp


IMG_2526.webp


IMG_2527.webp
 
little_joe said:
I will be putting Shorty up for sale, and wanted to give you all dibs + better pricing if anyone is interested. PM me and I can provide my mobile, tons of details, a spreadsheet of every tank of diesel and all work since I got it. $13k.

1996 Toyota Land Cruiser Prado KZJ-90 RHD
Legally imported, NC title in hand.
194,200km (120,400ish miles)
1KZTe 4-cylinder turbodiesel
4speed automatic
OEM limited slip rear axle
Plenty of recent maintenance work (brakes, suspension, etc). At 200km, it is due for timing belt which is a simple, quick job on this engine. The only thing I think it really needs is new tie rod ends, but it drives great as is.
Dual front airbags and ABS (for any other sissies like me).

Anyway, instead of writing a novella here, if you're interested, reach out. I'll get a lot more photos - the interior is almost perfect, I have the running boards back on and the front brushguard will be back on.
View attachment 4156581
Click to expand...
What mpg does this little beast get Joe?
 
FREE - various FJ40 soft doors. Vinyl and windows are in terrible condition on the full doors. Frames and misc parts are good. The half doors are better, one has a patch in the vinyl.

Located in Roxboro, NC. Come get them before I scrap them.

IMG_2663.webp


IMG_2664.webp
 
R.K. said:
FREE - various FJ40 soft doors. Vinyl and windows are in terrible condition on the full doors. Frames and misc parts are good. The half doors are better, one has a patch in the vinyl.

Located in Roxboro, NC. Come get them before I scrap them.

View attachment 4157671

View attachment 4157672
Click to expand...
Do you have the door jamb part that will work with those half doors? I have half doors, but they won’t close and stay shut with the same part as the full doors.
 
R.K. said:
Does anyone have interest in this ‘81 FJ60 body and frame before I part it out?

I’m keeping the drivetrain.

Rear of body shell is rusty.
Doors appear pretty good.
Hood is good except for one hinge mount.
Front fenders are pretty good.
Windshield is good.
Interior is decent.

Only parts missing (other than drivetrain) are tailgate, grill, rear quarter glass, and rear lift gate glass.

Located in Mebane, NC currently.
Click to expand...
I have a four speed transmission from a ‘87 and a rear tail gate (in rough shape) I can throw in for free to keep this on the road.
 
Price drop to $8500. Please pass around.

www.crxcommunity.com

FS - 1988 CRX DX with B16A and mods

1988 Honda CRX DX Engine OBD-1 JDM B16A with @ 90k miles OPD-0 to OBD-1 Engine conversion harness - no cutting Hasport Motor Mount Kit PLM Toda Replica Header AEM Short Ram Intake Vibrant Polished 2 1/2 muffler and custom 2 1/2 mandrel bend exhaust piping Chipped P28 purchased from phearble.net...
www.crxcommunity.com www.crxcommunity.com
 
You must log in or register to reply here.

Share this page

Back
Top Bottom