Official ONSC member buying/selling thread (24 Viewers)

[matzell]

Looking for a front differential for a LX 470. If anybody has a line on one, I will be eagerly awaiting their response.

What year? Gear ratio. I have one that I need to replace at least the pinon bearing in, but was going to put them all in. It came out of a running truck just made noise from pinon bearing. 200k + on it. IF you are not in a hurry, like April, I can put all new bearings in it and have it ready to go.

 

[Yotahead52]

What year? Gear ratio. I have one that I need to replace at least the pinon bearing in, but was going to put them all in. It came out of a running truck just made noise from pinon bearing. 200k + on it. IF you are not in a hurry, like April, I can put all new bearings in it and have it ready to go.

I’m searching for a friend of mine. He has both an LX 450 and a 470 but is not an active club member. He just likes Land Cruiser so I guess he has a little bit of sense right? I need to validate his ratio, but it’s a 2000 LX 470. I assume they all had the same gear sets in them but maybe I’m wrong. All I’ve ever had is 40/60/80s

 

[matzell]

I’m searching for a friend of mine. He has both an LX 450 and a 470 but is not an active club member. He just likes Land Cruiser so I guess he has a little bit of sense right? I need to validate his ratio, but it’s a 2000 LX 470. I assume they all had the same gear sets in them but maybe I’m wrong. All I’ve ever had is 40/60/80s

that would have a 4.30 gear set. That is what I have.

 

[matzell]

Anybody out there have a decent 3FE short block taking up space ? Firing up a stock build on FJ62 and this short block is toast. We have a head and bits, just need the block. Thanks in advance

Clint

I looked at mine at lunch today. It has some surface rust on #6 cyl from condensation. might be able to clean it up. it is up near the top of the block.

 

[thecapedcapper]

Still looking for a 200 series, now 08-15. I've expanded to looking for any year (but a lower price for 08-11).

 

[thecapedcapper]

95-97 80 series rear anti roll bar and brand new land tank heavy duty end links (95$ retail), ready to bolt up. 160$ for club members, can bring to meet n greet or relic run.

View attachment 3835806

View attachment 3835807

View attachment 3835805

I also have a couple of 80 series interior plastics - $good craft beer (or spirits, I'm not picky)

View attachment 3835821

Still available! Will bring to meet n greet or relic run.

 

[Roxx]

Wtb a winch. Tell me what you have. Nothing fancy just to pull cars on the trailer. Thanks

 

[Pick]

View attachment 3394596

Pearl is for sale. Have some explaining to do but I have another 60 I’m putting time and resources in to. $5k if you’re not on FB and can’t see the listing.

Log into Facebook - https://www.facebook.com/marketplace/item/827181102153486/?mibextid=6ojiHh

Would do partial trade for H55 + Rebuilt split case if anyone has one out there.

Something that piqued my interest hit Marketplace... I'd be willing to sell this for what I paid for it, $5,000. If not, I'll continue to love & drive it. I haven't done a single thing to it since I bought it - just drive it. Starts, runs, drives without issues. Does have some rust, happy to send additional pics to anyone interested... Better yet, come see it - I'm in north Raleigh, near Six Forks/540 area.

 

[pkniland]

Looking for a transmission crossmember for a 85 60 if anyone has one lying around.

 

[Roxx]

Looking for a transmission crossmember for a 85 60 if anyone has one lying around.

I dont have one but that year changed the short transmission or the long transmission. Until 85.5 and after.

 

[LCNuts]

Looking for a transmission crossmember for a 85 60 if anyone has one lying around.

I think I have one. I'm almost certain it's for an early model 60. Let me know if you are interested

 

[pkniland]

I think I have one. I'm almost certain it's for an early model 60. Let me know if you are interested

Definitely interested, let me verify which one i have. I think its an early three piece design

 

[pkniland]

I dont have one but that year changed the short transmission or the long transmission. Until 85.5 and after.

Did they change it for the 60 in 85, and then again for the 62?

 

[pkniland]

Did they change it for the 60 in 85, and then again for the 62?

Looks like the later model one, same as a 62?

 

[pkniland]

Wtb a winch. Tell me what you have. Nothing fancy just to pull cars on the trailer. Thanks

You can have this for free if you want, dont have the remote and it will need some wiring

 

[stoshzack]

Hi All -

I am basically done with my FJ40 build. Going to start purging extra parts. I have basically all the components to build a hard top. Not interested in shipping. If anyone is interested locally (within the state), I will post pics and prices. Everything will need work (welding, patching, etc.)

 

[coinoperated40]

Hi All -

I am basically done with my FJ40 build. Going to start purging extra parts. I have basically all the components to build a hard top. Not interested in shipping. If anyone is interested locally (within the state), I will post pics and prices. Everything will need work (welding, patching, etc.)

Post some pictures. Would like to see what is one the table.
Thanks

 

[open country]

Anyone looking for a FZj80? I am looking to sell mine, triple locked no rust beauty. Simply not driving it enough over the last few years. Any one interested let me know, not going to advertise yet.

Did the 43 sell? If I had the room and budget it would be a done deal by now. Have seen it around Matthews and my marketplace feed many times.

 

[izzyandsue]

Did the 43 sell? If I had the room and budget it would be a done deal by now. Have seen it around Matthews and my marketplace feed many times.

Not yet. Have had 2 buyers that spent a lot of time in the process (drove it, brought family to drive it and inspect, came back for more touchy-feely) and then couldn’t get the funds. So it has been on and off the market a few times. I drove it all weekend doing errands and rethinking if I should sell it. No rush on my part! So the 80 sits out there, looking jealously at the 43 and the 250….
I can’t post photos to MUD, all I get is a Server Error when I do that, hopefully is fixed soon

 

[40LandCruising]

FJ62 axle shafts in great shape, free if anyone wants them. Also have the rear brake drums and backing plates in great shape as well.

Located in Mauldin, SC