noobie here

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 4, 2006
Threads
2
Messages
33
Location
you tah
im a new guy here and have heard great things, i got a quick question after searching i wasnt sure about this, but i have a 74 and i want disc brakes in the front so i bought a 60 series axle 81 or 82 i think, what can i do to make this work on my 40, do i strip it down and put the knucles and stuff on the 40 axle or can i just swap it out completely. any help is appreciated, thanks:cheers:
 
Welcome to Mud!

You need to swap everything from the kuckle out. Including the birfield. The problem with swapping the whole axles is that due to it being so much wider you would need to outboard your springs to get it to bolt up. You will also need to modify the steering to fit as well.

Check out the Tech Links as there have been quite a few write ups on it so you get a better idea of the process.
 
Hi, welcome

Some have swapped the entire axle, however this is a major modification becasue it requires moving the springs out on the frame. The 60 series axle is also wider. It's much easier to simply swap the knuckles. If you want the extra width go for it, but if you are looking for easy, just swap the knuckles. I think the brake lines will just bolt up. You also may want to clearance your housing to allow the larger minitruck birfields while you have it apart. Search on hear and you will find information on that. The birfs are a little different, so I think you will want to keep your inner axle shafts, and use the birfields from the 60 axle.

Good luck.
 
will the inner axles match up to the birfs of the 60?
 
yup they will, you can even use the 60 short shaft as its the same length as the 40. you have to grind out the ball a little bit to make the 60 birfs fit in there as well. also note that with a 60 birf you go from the stock 10 spline to a 28 spline....stronger :). if you want to just throw the 60 axle in there you have to do what the other guys said about moving springs plus change your R&P because the 60's had a 3.75 and the 40's have 4.11 gears...good luck
 
i had a mini truck front disc brake conversion done on mine. looks real clean, closest to stock in the later series as you can get. STOPS GREAT
 
Back
Top Bottom