New Toyonka

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 5, 2008
Threads
5
Messages
51
Location
Fairmont, wv
Well since selling my FJ40 I have been looking for a replacement. As it turns out it was parked in the garage beside me all the time. I swore I would never fix this one up for 4wheeling but...here it is.
1997 FZJ80 Landcruiser.

200,000 miles
3 inch lift. (Springs /Shocks/Brake Lines)
35 in Trxus MTs
8000 lb XRC winch, synthetic line
Home made rear bumper
ARB's front and rear
4.88 gears
Sliders on order ( for the 5th week )

I was going to wait until the Sliders were on before I went any where, but Andre (Gizo) stopped by today and talked me into taking a ride. We went to Fort Hill and except for a few small hill climbs we mainly stayed on the road. We stopped to take a few pictures here and there.
It flexed pretty good. I did not disconnect the sway bars, I don’t have quick disconnects yet.


Here is a link to all the pics...

Toyonka/fZJ80 - Photobucket - Video and Image Hosting

100_6570.jpg


100_6569.jpg


100_6545.jpg

100_6544.jpg

100_6543.jpg

100_6567.jpg
 
Nice. No real need to disconnect the sway bars. There aren't a real limiter of flex on the 80s.

This was my first time out with the 80 and what you says seems true.
I was impressed with the amount of flex with the swaybars attached, especially on the rear.

I am not sure, but the front did not seem to flex like the rear...maybe just the way it is set up.
 
Nice Job. That is a great rear bumper.
 
Sweet looking 80 but I find it hard to believe you did not notice it sitting next to you in your garge.

It has been our family vehicle for a long time. I never thought it would someday be my DD and 4wheeler.

We replaced it with a 2004 4runner, it has the 3rd row seating, but my wife doesn't really like it. it just doesn't compare to the 80.
 
That's the best looking, homemade bumper I believe I have seen thus far on an 80. Nice!


PS: Too bad you ran out of steel before you got to the front! :D

Yea, wasn't my dream of a front bumper, but time and money have dictated differently. I really like the Slee Short Bus bumper...maybe for Christmas.
 
Nice lookin 80.


I dig that spare tire:cool:

:beer:

I meant to take it back off. It is now useless, and a 35 will never fit under there.
I want to go with an inside carrier. I Would try to build an outside carrier, but if I add it to the length of the truck it will no longer fit in my garage.
And it really can't go on top. I only clear with about and inch as it is.

Has any one build an inside carrier??
I mean a upright one, I am going to try to leave one of the 3rd row seats in. It is still my DD. I have to pick up the kids and there friends from all the sporting events in the world.
 
I made one for the inside in the back on the drivers side. Took off the grab handle and used a piece of 1.75 tube (scrap from other project) and cut and did some notching to make it fit over the third row seat bracket. I'm not gonna put those back in anyway...so the bracket got used for the lower mount and I used 1/8 or3/16" plate for the mount where the grab handle was. Two longer bolts and some grinding and welding and BAM. Inside spare carrier... for like damn near nothing.
I broke the digital camera so I will try to get a pic up. Maybe use the camera phone and download it. For now the bracket to attach it to the tube is a ratchet strap wrapped just right to keep it secure. Very secure.. cause I put my kids in the 80 and would hate to see a 285 making a home in the back seat. I'll try to get some pics up for ya.., hope this helps.


:beer:
 
I made one for the inside in the back on the drivers side. Took off the grab handle and used a piece of 1.75 tube (s**** from other project) and cut and did some notching to make it fit over the third row seat bracket. I'm not gonna put those back in anyway...so the bracket got used for the lower mount and I used 1/8 or3/16" plate for the mount where the grab handle was. Two longer bolts and some grinding and welding and BAM. Inside spare carrier... for like damn near nothing.
I broke the digital camera so I will try to get a pic up. Maybe use the camera phone and download it. For now the bracket to attach it to the tube is a ratchet strap wrapped just right to keep it secure. Very secure.. cause I put my kids in the 80 and would hate to see a 285 making a home in the back seat. I'll try to get some pics up for ya.., hope this helps.


:beer:

Sounds like what I am looking for.

can't wait to see the pics.

thanks


I didn't see the one listed (pictured) earlier, on the Slee site.
 
Sounds like what I am looking for.

can't wait to see the pics.

thanks


I didn't see the one listed (pictured) earlier, on the Slee site.

Click on the link above the picture and it will take you right to it. It will atleast give you an idea of how to do your own.
If you go to the website without using the link click these:

Electrical and Interior

Battery Trays and Relocation
Interior Accessories
Interior Mounting Bar
Switches & Circuit Boards
Expedition Gear
 
It has been our family vehicle for a long time. I never thought it would someday be my DD and 4wheeler.

We replaced it with a 2004 4runner, it has the 3rd row seating, but my wife doesn't really like it. it just doesn't compare to the 80.

i thought maybe you just decided to commandeer your neighbors rig.... what your're doing here is terrible. STOP IT!:clap:
 
Back
Top Bottom