New Power Steering Pump source

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 29, 2002
Threads
312
Messages
2,181
Location
Walnut Creek, CA
I have a Saginaw power steering conversion on my FJ40 and have gone through 3 re-manufactured power steering pumps over the last 15 years.
Has anyone found a supplier or manufacturer for a New (not re-manufactured) pump?
I see some on Summit's web site but not sure of quality.
Mine has the pressed on pulley.
I run a power steering cooler.
Tires are 35"

Thanks
Dave
 
It's a 2f.
conversion is already done.
Looking for a new power steering pump.

You are looking for a Saginaw pump or Toyota pump? Sag pump you can get at any neighbor good parts store.

Toyota pump(probably underpowered for 35s)
 
This thread has some part #s

 
I have has many issues with reman A1-Cardone pumps at my shop. More so the ones for GM vehicles. I will only put on a New pump from GM on those vehicles now, they are not much more than a reman. Another option is to send your pump in to PSC and have them rebuild it. Do you have a cooler on your set up? Heat kills these pumps, also make sure you have plenty of fluid, the larger the capacity the better.
 
I have has many issues with reman A1-Cardone pumps at my shop. More so the ones for GM vehicles. I will only put on a New pump from GM on those vehicles now, they are not much more than a reman. Another option is to send your pump in to PSC and have them rebuild it. Do you have a cooler on your set up? Heat kills these pumps, also make sure you have plenty of fluid, the larger the capacity the better.

Thanks for the input
Where are new pumps available?
The pumps for the conversion are off of 1970 or 80s Chevy trucks
 
You are looking for a Saginaw pump or Toyota pump? Sag pump you can get at any neighbor good parts store.

Toyota pump(probably underpowered for 35s)
I installed one of these aftermarket Toyota Pumps the other day, huge power on 33” tyres
 
I agree that all A-1 Cardone stuff is junk and I know why you hate reman stuff. BTDT.

I put a reman (by Lares) pump on my '83 GMC plow truck and it works well. Why does this matter? Because the truck is in 4WD all the time, with 4 tire chains, and has 500# of snow plow on the front end. If a power steering pump can provide enough pressure to make steering easy under these conditions, it's good.

Rock Auto sells Lares-reman pumps (reman'ed in the US).
 
I bought one from them probably 18 years ago. I believe it is still in service on the car I installed it on. Their website does not state whether their pumps are new or remanufactured. I called them to ask, and they confirmed that they are new. Borgeson is a great USA company and I highly recommend them.
 
I ended up buying a New PSC Pump and housing SP1401F 79 & earlier Hi Flow P Pump with GM Truck Reservoir-SP1401F : Pump Systems and Components, GM | PSC Motorsports - performance steering components through Summit 1977 CHEVROLET C10 PSC Power Steering Pumps SP1401F . Took 2 days to get here. Faster than I needed it.

It comes in chrome or raw metal. Thought about the chrome but ended up with raw metal, scuffed it up and put a coat of VHT black engine paint on it. Nice to work with something that has not been repainted and has a questionable rebuild. Should have it on in a week or so. I took the old one off and since my exhaust gasket on my header has been leaking, decided to do that at the same time.

One thing I found interesting is PCS has a red tag on the pump telling you which fluid to use and specifically not to use synthetic or transmission fluid. I had ran synthetic in my last pump. I went and bought some AC Delco power steering fluid for it. I have a cooler so hopefully it will not overheat. I only run 35" tall tires. Before the cooler I had issues with it overheating. I started running the synthetic because I figured it would stay even cooler. I digress but since it has a warranty I will run the AC Delco. Also found that I have several bottles of power steering fluid in my cabinet from other projects and am always buying some because I didn't think I had any. None of it was AC Delco though, so now I have that.
IMG_7051.JPG
IMG_7048.JPG
IMG_7052.JPG
IMG_7068.JPG
IMG_7056.JPG
 
Back
Top Bottom