Need A Rear Locker

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 22, 2002
Threads
62
Messages
1,704
Location
Brownsville,Tx.
I need a locker for my cruiser. It's got a 4spd tranny w/ case and a 350 v8 with a mild toque cam. The crusier to me has a lot of torque, the engine was built with that purpose in mind. Now I woul like a locker something not too expensive not too cheap. I 've heard of the lockright beeing used a lot in these type of veihcles. I problly run tires 35's to 37's I am running stock axles.

does anybody run minispool?

I know arb it's good but expensive.

detroit it's OK, But I don't know if it's the best choice


Need your advice

Thanks!

How about those aussie lockers? I keep hearing about them, Who sells them? and What's the price?

Another question What type of axle I have? What can I compare it to?
 
It would be nice to know what year truck you have....

Spools are not available for FJ40's...never have been...only alternative is welded, discussed many times on the forum. I love my welded rear diff. Detroits are great, ARB's are also, neither is terribly cheap, but both are durable and proven.

http://www.ih8mud.com/ads.php for ordering an Aussie...hit some of the other vendors there for an ARB or Detroit price as well.
 
woody said:
It would be nice to know what year truck you have....

Spools are not available for FJ40's...never have been...only alternative is welded, discussed many times on the forum. I love my welded rear diff. Detroits are great, ARB's are also, neither is terribly cheap, but both are durable and proven.

http://www.ih8mud.com/ads.php for ordering an Aussie...hit some of the other vendors there for an ARB or Detroit price as well.

I've *heard* that some stuff for a Chevy 12 bolt axle can be modified for use in a Cruiser axle. Specifically, an Auburn Limited Slip.

I suppose that one could modify a 12 bolt spool similarly.

I can't verify this, though.
 
have an aussie, love it easy to do yourself, search theres tons of stuff
 
Tigerstripe40 said:
I've *heard* that some stuff for a Chevy 12 bolt axle can be modified for use in a Cruiser axle. Specifically, an Auburn Limited Slip.

I suppose that one could modify a 12 bolt spool similarly.

I can't verify this, though.
Saw "W" do that at CM02 with a 12-bolt mini spool. I don't know what he did exactly though. Maybe one of the Oregon guys will know.

I'm on my third lunchbox locker. An Aussie this time. It's noisy as hell but it seems to work ok I guess.
 
JasonH said:
Saw "W" do that at CM02 with a 12-bolt mini spool. I don't know what he did exactly though. Maybe one of the Oregon guys will know.

I'm on my third lunchbox locker. An Aussie this time. It's noisy as hell but it seems to work ok I guess.

I;ve been running aLock Right for about 2 years now in my Daily driven truck.
No problems. I don't mind the noise (I actually think it's kinda cool).

-James
 
Sorry my Crusier is 79?
 
Welded rear. Had a lock-right in the back for years and loved it. When I switched to 36" tires I moved it to the front and welded the rear. Welded rears have less charactoristics to get use to and I love the way is performs
 
Satisfied aussie user here....clack, clack, clack........but lots of traction too!! It does seem to differentiate around corners pretty well, even when slippery if you don't get too carried away with the throttle! YMMV! Cheers!
 
IMO, full case Detroit (left) - increased tire wear & *sometimes unloads with a mild jolt around turns. ARB - best of both worlds! Last pic is a spool just cuz I had it sittin' on the shelf........ Ya git what ya pay for.....
 
Last edited:
First, if you're gonna shop around for ARB's for LC axles, ask yourself if you're gonna run tires larger than 36" & do some rock bashin'. If you are, I'd consider an axle swap. If not, I've had good luck w/ Reider Racing in Michigan.
 
Woody runs 39.5 irocks and wheels hard, he dosent have much issues with his rear axle..

My Welded Rear is Great, hasent broke, but im getting sick of buying tires
 
I also run a EZ-Lock in the front axle, and other than reshimming after CM04, it's given me zero troubles as well...

I've busted a lot of other parts, including 3 pinions, one t-case shaft, an older Longfield, and some other stuff...the welded diff and front EZ have held just fine.
 
Back
Top Bottom