Need A Rear Locker

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

how and where would you weld to weld the rear? cause im startingto thinkabout doing it also
 
a search on "welded" will net you a dozen threads, and a quick hit to the Tech Links will find the extensive writeup I did on the procedure....
 
Welded rear with a lockright up front for over 4 years and have no complaints. I DD my rig all over the place and would weld the rear of another rig if I had one in a heart beat.
 
Sorry Woody, what axles are you running? and what tires and drivetrain?
 
Domek said:
Sorry Woody, what axles are you running? and what tires and drivetrain?

front axle: FJ40 housing, EZ-Lock, 4.11 stock gears, 4340 PIG inner shafts, 4340/300M Longfields, cryo'd mini knuckles w/ARP studs, 4x4 Labs steering, WTOR hydro assist, FJ40 vented discs and calipers, Aisin lockouts w/ ARP studs, 1-1/2" alum spaces, 39.5 IROK's on 17 x 9.5 Allied Beadlocks...SOA, offset mounted on FJ55 rear spring packs, 14" Bilstein 5150's, center limit...

rear axle: FJ40/minitruck hybred custom centered housing, 4.11 cryo'd stock coarse ring/pinion, welded chunk, stock ~85 minitruck shafts, custom discs with Monte calipers, 1-1/2" alum spacers, same tires/rims...4-link 1/4 elliptical suspension, 14" 5150's, center limit...

P1010059.jpg


...nuthin fancy really...drivetrain is a 1991 350 TBI, built manual VB 700R automatic, Art Carr, D300 with 4:1 and 32-splines, minitruck CV rear shaft, 2-piece front shaft, 3/8 flat skid plate (23" to bottom of frame rail), and some other minor little simple things....
 
woody, is that orange and white truck in the background an old bronco?
 
I went detroit. I love it and have had no issues thus far.

In hindsight, I would have saved the money and just welded it up.

I have never really like ARB's for only one reason. If ya break a rear axle or pinion or something where you have to tear into your axle on the trail, you have to be very carefull to keep all your parts clean. This can be difficult, don't ask me how I know. I feel with a lockrigh,detroit,welded rear, you are allowed a little more flexibility when it comes to swaping parts out on the trail.
 
sand rider said:
woody, is that orange and white truck in the background an old bronco?

yeppers...a pretty clean one too....I know the past 2-3 owners, and while it needs some work, it'll be a weekender for the current owner...

he also has a trail-beaten one too...
 
OnTheSpot said:
I went detroit. I love it and have had no issues thus far.

In hindsight, I would have saved the money and just welded it up.

I have never really like ARB's for only one reason. If ya break a rear axle or pinion or something where you have to tear into your axle on the trail, you have to be very carefull to keep all your parts clean. This can be difficult, don't ask me how I know. I feel with a lockrigh,detroit,welded rear, you are allowed a little more flexibility when it comes to swaping parts out on the trail.

Sure, the window in the stock case is larger than the ARB for easier access & you can replace side or spider gears on the trail. With the ARB, you gotta remove & disassemble the case to replace them. +1 for the stock case. The ARB case is twice as thick & has 3 spider gears. +2 for the ARB!
 
Last edited:
timbercruiser said:
OK, now the big question.......Weld the front???

NO

if you ever want to steer, no...if you don't want to replace birfs/shafts every trip, no....

The lunchbox lockers work great in front, as do the ARB's and others....welded is poor choice in front....
 
Woody so what exactly you would call modified?

What's left from the original cruiser
 
The Aussie will give during turning maneuvers, and at times when you are not under throttle loads...I can definitely hear my front axle clicking on the trail, but it pulls well when ya gas it.

The locked ARB will break things, but you "should" be smart enuf to unlock it during tight turning situations ...heheheheh :flipoff2:
 
Domek said:
Woody so what exactly you would call modified?

What's left from the original cruiser

frame is a stock 1969, with some adjustments....tub is a stock 1974, but re-sheeted since all the original metal rusted away....front housing is stock, chunks are stock, steering wheel is stock :D

Built the way I want it...and constantly changing too....
 
woody said:
The Aussie will give during turning maneuvers, and at times when you are not under throttle loads...I can definitely hear my front axle clicking on the trail, but it pulls well when ya gas it.

The locked ARB will break things, but you "should" be smart enuf to unlock it during tight turning situations ...heheheheh :flipoff2:


I kinda figured that....Aussie it is!!!
 
Back
Top Bottom