Parting Out Lots of fj60 parts from Oct1980 and June1986

[InTheFace]

Location

United States

No longer for sale. Thanks

 

[Beachcomber Bernie]

PM sent

 

[montyorpenn]

In need of rear quarter driver side in good condition. If you can cut it horizontally above the rear marker light, how much to include shipping to 17745?

Thanks,
Monty

ontyorpenn, Yesterday at 10:18 AM Edit Delete Report

 

[InTheFace]

In need of rear quarter driver side in good condition. If you can cut it horizontally above the rear marker light, how much to include shipping to 17745?

Thanks,
Monty

ontyorpenn, Yesterday at 10:18 AM Edit Delete Report

 

[NookShneer]

Looking for A/B Pillar handles, rear beach shoulder belts and trim?

 

[InTheFace]

Looking for A/B Pillar handles, rear beach shoulder belts and trim?

No shoulder belts or pillar handles on either of the Cruisers.

 

[CenTXFJ60]

How's the dash. Interested if in good shape. Also the plastic center bezel (around the AC controls) if not cracked. Thanks.

 

[InTheFace]

How's the dash. Interested if in good shape. Also the plastic center bezel (around the AC controls) if not cracked. Thanks.

One crack on upper left bolt hole. Could definitely be repaired.

Dash is cracked

 

[CenTXFJ60]

Thank you for the quick response. My current parts are in the same condition. Good luck with selling the rest of your parts.
Jim

 

[FJ4FUN]

need both rear qrtr panels if still available... shipped to Nor CA 95127.

 

[InTheFace]

need both rear qrtr panels if still available... shipped to Nor CA 95127.

pm'd

 

[reefdesigns]

what type of rear axle do you have a SF or FF?

 

[InTheFace]

what type of rear axle do you have a SF or FF?

SF. I have 2 of them

 

[4WD Toyota Owner Magazine]

Hi, I need the L-shaped frame brackets from the tranny crossmember, like these. Also can take whole thing off your hands.

 

[InTheFace]

I still haven't removed the engine and transmission out of the '81 that has the style of bracket. And the L pieces are welded to the frame on the '86 with the bottom being the only bolted part.

 

[CenTXFJ60]

PM sent on the 86 trans cross member. Thanks

 

[fl4031003]

Interested in rear body weatherstrip ( goes around entire rear opening ) and the small metal plate that goes on the inside of rear lift gate ( hatch)

 

[new2you]

How much for distributor, igniter. and push rod cover?

 

[InTheFace]

How much for distributor, igniter. and push rod cover?

Sorry, already sold.

 

[1973Guppie]

fuel filler tube