Late model wheel color

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 26, 2019
Threads
61
Messages
309
Location
Oregon
I picked up these 5 fj60 wheels. The plan is to have them sandblasted and powder coated factory white or factory gray. Truck is yellow with a ugly yellow fiberglass cap that is soon to be painted factoy white.

I need help deciding gray or white!

IMG_20191126_192308.webp


IMG_20191126_192403.webp
 
I “think” the factory color for late model fj40 wagon wheels was white, probably 033 or 031. The standard wheels were grey. The 031 is not as white as the 033 so may look better on a wheel.
 
I painted mine Cygnus white, as I have on three that I own, a red 76, tan 82, and a blue 77. They match the Bezel and I think they look good. They really stand out on a white letter wheel like a BFG.
1574859219411.webp


1574859301300.webp

1574859369623.webp
 
IMO paint them white as most all others had said

Gray will look like you were confused :)

Nice looking cruiser BTW

There is a factory bumper that can go on your roof drip edge so you do not have to drive around with that rag there :)
 
IMO paint them white as most all others had said

Gray will look like you were confused :)

Nice looking cruiser BTW

There is a factory bumper that can go on your roof drip edge so you do not have to drive around with that rag there :)

I'm definitely leaning towards 033 white. There are some great looking rigs in this thread!

My poor cruiser has been sitting in the dusty shop for too long with it's good up. Hopefully those days are coming to an end soon.
 
I looked up the color used for the wheels and you can order a swatch to see what it looks like. My project started 9 years ago and it was at that time I had the wheels powder coated. I chose this color based on a dealer brochure for the 1983 land cruisers as the rims are definitely not a true white.

here's the link to the site Prismatic Powders - PORCELAIN WHITE
 
Back
Top Bottom