LANDTANK performance MAF housing

[landtank]

under review? You changing it again?

I haven't changed it yet. There has been some concern that the sensing line should be attached with this mod. So I've ordered a revised housing and will begin testing it shortly.

 

[ShawnTRD]

I haven't changed it yet. There has been some concern that the sensing line should be attached with this mod. So I've ordered a revised housing and will begin testing it shortly.

Sign me up for the beta program....

 

[Riad]

Waiting for it too...

 

[ShawnTRD]

So what makes the improvement? Then different sensor? I take it the ID of the housing is the same.

Still trying to figure this out.

 

[landtank]

the ID of the housing is actually slightly smaller, however the newer sensor is much smaller. Right now there is only the butt dyno of everyone who has bought one to say it is an improvement. That will hopefully change soon.

 

[landtank]

I did a quick idle idle test of the new housing and the output voltage was within .05 vdc of the stock unit. Well within the factory range. I'm waiting on some testing equipment to do a more thorough eval on it.

 

[VanGo]

Rick,

Thanks for your work and providing well innovated mods to the landcruiser community... I believe your sig line says it all!

 

[ShawnTRD]

So whats going on? Can I order one?

 

[Riad]

wait new sensor? I can't use the one I have?

Details Rick...

 

[firetruck41]

wait new sensor? I can't use the one I have?

Details Rick...

Part numbers of the sensors you can use are in the first post of this thread.

 

[Riad]

I purchased the new sensor from Dan when I got the housing. I thought Rick was saying that there's another "newer" sensor that is needed for this newer housing.

 

[landtank]

no newer sensor. Just a bore change on the housing to allow the use of the vacuum line for the fuel pressure regulator. I'm hoping to have a sleeve that can be installed in the field for those who want it.

 

[Filmpros]

Put me down for 2 of these....any idea when they will be available?

Also want a Turbo Manifold....put me down for one of those as well.

 

[corsair23]

no newer sensor. Just a bore change on the housing to allow the use of the vacuum line for the fuel pressure regulator. I'm hoping to have a sleeve that can be installed in the field for those who want it.

I guess I haven't been following along too closely lately...I have two of the housings so I'll need two sleeves? Any more details, in another thread possibly?

 

[landtank]

I'll have more info on the sleeve soon.

 

[ShawnTRD]

Hey Rick, if your having trouble getting these I can see if something my buddy would want to do. I seen where your supplier wants 30+ at a time. I'm sure he could do less at a time then that.

 

[Greg@RME]

Any more available? I'm hoping on the LandTank wagon... I'd like one of these and the turbo manifold.

If you're needing more people to commit to a minimum order, count me in. If you have any left, let me know. Thanks!

 

[EvoE2]

Let me know when is going to be available the new design

 

[CruiserJack]

I am in too. Let us know when the new one is available.

 

[Bogart]

I woiuld like the new design MAF when available, please put me on the list.

Cheers Peter