- Thread starter
- #41
Hey War, Im headed back there to pick up my 2 rims I will check that truck which I got the hubs out off it has a 22re in it.I will let you know.
junk yard find
- Thread starter vipergrhd
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Viper, where are you located and where is this yard of wonder that you keep finding all this great stuff at? I am guessing out west.
NorCalBorn
10 Year
15 Year
Can't. 1 of the shops I used to use just had stupid drama and I am not going back to them anymore until I hear an apology for the misunderstanding.
~I even thought for a second of deleting the pics related to them. (Not the place w/ the switches, seats, etc.)
- Thread starter
- #44
Wild west
Jynx, i would love to take you there but your 2 time zones away.i guess just lucky shot.There is a few near my house and the rest are about 10 miles away.
Jynx, i would love to take you there but your 2 time zones away.i guess just lucky shot.There is a few near my house and the rest are about 10 miles away.
Yep, thats what I thought. Man it is amazing to me the concentration of these trucks in and around the west and southwest. Here we are lucky to find one or two in a yard and by the time they land in a yard there isn't much left worth picking, or the yard wants WAY too much for the parts.
NorCalBorn
10 Year
15 Year
*We should consider doing the mudship deal that all the Cruiser heads use and have our own little parts train for this part of the forum?
Have either of you seen a set of 1st gen SR5 4runner seats in grey? The guy I got my current project from swapped the grey ones into his rig and replaced them with red. They need recovering anyway but a good set of decent used ones would probably run me about the same. Also, any grey interior bits like door handle trim cups, the "L" trim that covers the bolts on the top, uncracked dashpad, etc. would all be things I might be willing to pay to ship if the price was right.
I would also be up for a MUDship network. I run between Jackson and Knoxville along I40 pretty regularly if that helps get the ball rolling.
I would also be up for a MUDship network. I run between Jackson and Knoxville along I40 pretty regularly if that helps get the ball rolling.
- Thread starter
- #48
I will try Monday since i'm off i will be looking for some other small stuff for my truck.will a seat of a truck work too?i did ran into a first gen. last time but didn't notice if there was a pair of seats.
Hey Norcal that is a great idea i'm sure the cruiser guys wouldn't mind a lot of them hits the road all the time. maybe we should have a mudship board of sorts? maybe the mods could come up with something my brain is still in sleep mode.
- Thread starter
- #49
I just got back from the yard close to me to pick up the other rims they owe me and it was in good shape after all. Jynx i did find a pair of seats from a first gen PM me how much are you willing to spend i didn't ask how much they were asking i will post pics later.
Wardamneagle i did check out the 22re they have but it's a different solenoid i will keep looking for it,i might go to a couple of yards tomorrow wish me luck.
John
Wardamneagle i did check out the 22re they have but it's a different solenoid i will keep looking for it,i might go to a couple of yards tomorrow wish me luck.
John
- Thread starter
- #50
First gen 4runner
Jynx here you go,i hope these are the seats your looking for.
It had some cheap seat covers on it i just peeled it off so you can see the condition.
Jynx here you go,i hope these are the seats your looking for.
It had some cheap seat covers on it i just peeled it off so you can see the condition.
- Thread starter
- #51
bucket seats
last shot on pass. side
last shot on pass. side
I just got my 4Runner back from the paint shop and noticed that the number stamped on top of this VSV is not the Toyota part number so I corrected my earlier post (above). The Toyota part number, for the sake of completeness is 89570-35220.
Sorry for the bump but I can't stand to leave bad info in a thread.
NorCalBorn
10 Year
15 Year
No, it's appreciated, also keep in mind the part numbers have changed recently also. If you were to say go in with that # it may not correlate to today's stuff. (If you're buying it from a dealer though, you got other worries?
$$$ )
No, it's appreciated, also keep in mind the part numbers have changed recently also. If you were to say go in with that # it may not correlate to today's stuff. (If you're buying it from a dealer though, you got other worries?
That's still the right part number and it's in the Toyota system; it's also discontinued and therefore unavailable new. :-(
- Thread starter
- #55
VSV
Hey War, Do you still need that VSV? i think i found one last week not sure if working,i can buy it and return it if doesn't work.
Hey War, Do you still need that VSV? i think i found one last week not sure if working,i can buy it and return it if doesn't work.
I'll let him have first dibs, but if he passes (he posted in the "What is this" thread that he fixed his), I will definitely take it. I have a working one now, but they are unobtainium so I'd like to have a spare.
- Thread starter
- #57
I will give you guys a heads up when i get it,i will test it also to make sure i'm not wasting money.
I wouldn't mind having a spare also but I think mine is good to go now. KLF is welcome to it but if you stumble across more than one and they are cheap (I'm thinking <$20) then I would buy one.
On a similar note, I haven't checked ebay but let me know if you see any dark brown door handles in good shape (see pic). I've bought good arm rests and cranks over the years and just noticed that these pulls and surrounds are in pretty bad shape.
Funny that you are looking for handles, cause I am looking for the handle trim cups.
I would love to have the big ones, same each side and shown to the left in the picture, but the more elusive one is the small one shown to the right. It is only on the passenger side so that rear passengers can open the door. If anybody finds some of these in gray, or any color for that matter please snatch them up and I will paypal you the $
Thanks
I would love to have the big ones, same each side and shown to the left in the picture, but the more elusive one is the small one shown to the right. It is only on the passenger side so that rear passengers can open the door. If anybody finds some of these in gray, or any color for that matter please snatch them up and I will paypal you the $
Thanks
^^^ I have these same sculpted door panels in gray waiting to install (I'm also installing power windows), and I also need the cups for all 3 handles. They unfortunately are different than the more common ones like pictured in brown above. No idea where I'm gonna find them...