Intro and Advice

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 2, 2022
Threads
1
Messages
5
Location
11215
Hey Folks,

New to the site, but have known of it and casually browsed it over the years. I have a 1973 FJ40 that my grandfather bought new from the dealership. It's been in my family it's whole life. My grandfather, father, and two uncles have all driven it at times, and I drove it regularly in high school up to about 2004. Since then, as painful as it is to admit, it has been neglected. I haven't been around to put any time or money into it, and my father hasn't kept it up well (at all).

I am currently living in NYC for my wife's work. We will be here for 2 more long years, then we're moving back to Colorado where I have spent most of my adult life. The truck is back in Mississippi, where I grew up (and where it was originally bought). I want to start preparing for what will be a big project. Unfortunately, I dont have anywhere to keep it here in the city with me, so I cant really get started on major stuff until we move back to CO. As of now, the end goal would be a restomod for a reliable daily and adventure/camping rig. There is a lot to do and I would love some advice on where to start.

I have the original 1F and 3 speed. It is not running as of today. Back when I was driving it (again, almost 20 years ago now) we did a front disc brake conversion, added a lift, new carb, headers, exhaust, and I'm sure a few other things that I cant recall. I am going to be back in MS visiting family this coming week and plan to clean it out really well and give it a good inspection for rust and other major issues. I want to get a good handle on what I have to work with. Also I want to preserve it from any additional damage until I have a place to keep it and can really get moving on the project. I have included a few pictures for yall to reference. Again, any helpful advice would be appreciated. Also, shaming me for letting this family heirloom degrade into it's current state is also appreciated, and expected.

Thanks!
Reed
IMG_1564.webp
IMG_1573.webp
IMG_1569.webp
 
Hey Folks,

New to the site, but have known of it and casually browsed it over the years. I have a 1973 FJ40 that my grandfather bought new from the dealership. It's been in my family it's whole life. My grandfather, father, and two uncles have all driven it at times, and I drove it regularly in high school up to about 2004. Since then, as painful as it is to admit, it has been neglected. I haven't been around to put any time or money into it, and my father hasn't kept it up well (at all).

I am currently living in NYC for my wife's work. We will be here for 2 more long years, then we're moving back to Colorado where I have spent most of my adult life. The truck is back in Mississippi, where I grew up (and where it was originally bought). I want to start preparing for what will be a big project. Unfortunately, I dont have anywhere to keep it here in the city with me, so I cant really get started on major stuff until we move back to CO. As of now, the end goal would be a restomod for a reliable daily and adventure/camping rig. There is a lot to do and I would love some advice on where to start.

I have the original 1F and 3 speed. It is not running as of today. Back when I was driving it (again, almost 20 years ago now) we did a front disc brake conversion, added a lift, new carb, headers, exhaust, and I'm sure a few other things that I cant recall. I am going to be back in MS visiting family this coming week and plan to clean it out really well and give it a good inspection for rust and other major issues. I want to get a good handle on what I have to work with. Also I want to preserve it from any additional damage until I have a place to keep it and can really get moving on the project. I have included a few pictures for yall to reference. Again, any helpful advice would be appreciated. Also, shaming me for letting this family heirloom degrade into it's current state is also appreciated, and expected.

Thanks!
Reed View attachment 2998228View attachment 2998230View attachment 2998231


do u by chance have the original dealership day of first use purchase paper work , that your grand father would of received when he bought this nice unicorn ?


that's kool stuff to see and share you know :) :beer:



WELCOME TO MUD !

matt
 
Last edited:
do u by chance have the original dealership day of first use purchase paper work , that your grand father would of received when he bought this nice unicorn ?


that's kool stuff to see and share you know :) :beer:



WELCOME TO MUD !

matt
Hey Matt - Agreed. That would be very cool to see. I do not have them myself. I will ask my father when I am back home in a few days. I remember a Land Cruiser file folder I had when I was a kid where I would keep info on it, magazine cut outs, SOR catalogues, CCoT calendars, and other print outs during the early 2000s internet era. I'll check in there, but unfortunately I doubt it.
 
Only advice is to start saving $$$
LOL! Yep, that is the one thing I do know. But the money it's gonna take bringing this 40 back to life is better than a lot of other stuff I would spend it on. That being said, what would be the best thing to start spending on? Get it running? Engine and drivetrain work? Work on the body/frame/rust. I would like to DIY as much as possible. Not necessarily just to save money (thats a great plus though), but because I enjoy it.

Thanks!
 
I'd focus on getting it driving and stopping. Oh and the seats lol then start using it and seeing what you need to do next.

There's posts on here about it but I bet you could get a lot of that paint off of it and looking decent.
 
Welcome! Do you have the hardtop?

I'm just starting my journey (I should create a build thread haha). Working on the brake system now. My order of operations is usually:
1. get the brake system working so you can safely work on this thing.
2. fuel system
3. cooling system
4. basic electrical
4. get it running
5. drivetrain
6. all the other crap

do u by chance have the original dealership day of first use purchase paper work , that your grand father would of received when he bought this nice unicorn ?
I'm interested to know what you mean by this @ToyotaMatt. Like the service book? or?
 
I'd focus on getting it driving and stopping. Oh and the seats lol then start using it and seeing what you need to do next.

There's posts on here about it but I bet you could get a lot of that paint off of it and looking decent.
Nice. Thanks! Yep, seats are one of the first items on the list. Also have to get a new gas tank. And I will definitely search for those threads. I want to take it back to the factory rustic green.
 
Welcome! Do you have the hardtop?

I'm just starting my journey (I should create a build thread haha). Working on the brake system now. My order of operations is usually:
1. get the brake system working so you can safely work on this thing.
2. fuel system
3. cooling system
4. basic electrical
4. get it running
5. drivetrain
6. all the other crap


I'm interested to know what you mean by this @ToyotaMatt. Like the service book? or?
Yes, I have the hard top and doors. They will likely need a good bit of work too.

Thanks for that. And good luck on your build!
 
Welcome! Do you have the hardtop?

I'm just starting my journey (I should create a build thread haha). Working on the brake system now. My order of operations is usually:
1. get the brake system working so you can safely work on this thing.
2. fuel system
3. cooling system
4. basic electrical
4. get it running
5. drivetrain
6. all the other crap


I'm interested to know what you mean by this @ToyotaMatt. Like the service book? or?


well ,

all this stuff i personally collect like a bandit , some i have found buried deep in a cruiser i had bought in the past , some folks give me because they know its permanently

archived for eternity too ...........

and ............

my wife made me make a will finally at age 48 , 100% of all my personal Toyota swag collection is willed to the HERITAGE Museum hands down .......



here is what i speak of , i tried to make everything 1972 modle year specific of close , the TSB technical service bullitans 1972 all , were mailed to customers notifing them to come in for a recall or check-up .........


again , nice family heirloom ! :beer: :)


matt


Here is a unicorn 🦄 1972 TsB. Ewd for u

Save these images , they are NOT in any of the common ewd reprints. That I’m aware of ?

Nothing here is a reprint / everything is original toyota print media and so is the plastic TEq credit card 💳 “ thing “ ..

0E0A9019-49F3-4120-9CF5-7526ACEFF79E.webp
DD559A55-6FD4-4620-B9D0-DFB59A52F17E.webp
C716AF6E-5527-44F3-B557-A68A71C7202C.webp
CBFCCF73-CFC8-4C4A-984A-BFAE8AED8B95.webp
BFE38E45-FEF3-4988-80BF-8FCD1E5769C4.webp
53B4C615-AEE3-46DC-A4B6-E5B6DE80FCC4.webp
FF2050DF-EB42-4C79-B16F-6B13EBFB724F.webp
F21610F4-8A52-4A8C-A9C2-1A50ABAA5BFB.webp
7522AC60-2025-4698-A671-55765350B5F4.webp
 
Last edited:
CCoT calendars
:D the wife probably won't let you put those on your shop's walls in a couple of years...

What part of Colorado? Nice rig. No shaming here, it's 40 Landcruiser and you own it!
 
That is a cool Cruiser!! So neat that you are bringing it back to life.
I would leave the bezel alone, unless there is obvious signs that it was flipped. Some came with it upsidedown.
Possibly the dumbest thing I've read on 'Mud.

The bezel is meant to be thick side up.

Stop believing dumb stuff.
 
^^^ WTF!
 
Hey Folks,

New to the site, but have known of it and casually browsed it over the years. I have a 1973 FJ40 that my grandfather bought new from the dealership. It's been in my family it's whole life. My grandfather, father, and two uncles have all driven it at times, and I drove it regularly in high school up to about 2004. Since then, as painful as it is to admit, it has been neglected. I haven't been around to put any time or money into it, and my father hasn't kept it up well (at all).

I am currently living in NYC for my wife's work. We will be here for 2 more long years, then we're moving back to Colorado where I have spent most of my adult life. The truck is back in Mississippi, where I grew up (and where it was originally bought). I want to start preparing for what will be a big project. Unfortunately, I dont have anywhere to keep it here in the city with me, so I cant really get started on major stuff until we move back to CO. As of now, the end goal would be a restomod for a reliable daily and adventure/camping rig. There is a lot to do and I would love some advice on where to start.

I have the original 1F and 3 speed. It is not running as of today. Back when I was driving it (again, almost 20 years ago now) we did a front disc brake conversion, added a lift, new carb, headers, exhaust, and I'm sure a few other things that I cant recall. I am going to be back in MS visiting family this coming week and plan to clean it out really well and give it a good inspection for rust and other major issues. I want to get a good handle on what I have to work with. Also I want to preserve it from any additional damage until I have a place to keep it and can really get moving on the project. I have included a few pictures for yall to reference. Again, any helpful advice would be appreciated. Also, shaming me for letting this family heirloom degrade into it's current state is also appreciated, and expected.

Thanks!
Reed View attachment 2998228View attachment 2998230View attachment 2998231


so Reed,


this is what i think there trying to say , :) :beer:




1651542754468.webp
 
Air-fuel-spark. Make it stop.

Then, have at it..!!!

The search function is your friend. Find a buddy who works for beer. Get yourself some service manuals and leave them on the night stand. Claim at least one room in the house for parts, your Mrs will love you for it. You like caffeinated beverages? You will. Get a mechanics creeper AKA the Barka lounger. Sell a kidney and buy a Milwaukee impact driver, a 37* flaring tool, and a compression tester. Start brushing with FIPG. Put Kurt @cruiseroutfit on your speed dial. If you can solve a Rubics cube, You’ll be good at unscrewing an impossibly hacked wiring harness. Get the 2f order tattooed an your right hand and the number to a good shrink tattooed on your left. Buy a knuckle rebuild kit or three, you’ll need them. Looking for a Vader light? So is everyone else. Bet you thought a “dizzy” came in 16oz containers. Call @ToyotaMatt at 3:00AM he’s up. Have a favorite rim/tire comb you want to run? Well your wrong and there’s 1200 separate threads to prove it. ZDDP is not a breakfast cereal and dielectric grease isn’t alternator lube. Ever ”burp” a tractor engine? Ever flex your “suspension” or test your “pre-load“ on date night? Are your “nuts” shouldered? Better talk with Mark @65swb45 about the hitch hikers guide to the esoteric T-case rebuild and the Zen art of shackle reverse. Learn to speak “Stralian” and tune into Terrain Tamers Cartoon on Saturday morning. You can really never get enough Never Seez on a spring perch bolt. And lastly I know a guy, school trained in the ancient art of bed liner removal, who for a nominal fee, can travel…

Welcome, enjoy the show…
 
Last edited:
Back
Top Bottom