i HATE my 40!!!!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 30, 2003
Threads
647
Messages
16,635
Location
windy wyoming
since the day i got it running the p.o.s. classic cruisers adapter has leaked. took me three years to find something that would keep oil from leaking out of the rear hubs. the power steering, which never leaked before, all of the sudden had decided to leak like a seive at the pressure hose fitting on the pump. at moab, the breather on the tranny plugged and spooged 90wt everywhere

so, i pull the top cover, knock out the breather, tap replace with pipe nipple...figure while i've got it down, i'll replace the adapter with one of woody's. now because of how far forward the tranny is, i can't jockey the f$#kin top cover back on and i've tried 1/2 drill bit, egged out 1/2" drill bit, 33/64 drill bit, and egged out the 33/64 holes and the f%$kin t case still won't go on the adapter.

give me one reason why i should get rid of this P.O.S.!!! i've got another 40 here to build that's got a few updates that should've been done to mine....should i just start on that one now and take mine out and burn it (i could use the fuel i need to drain out of my 55 to light it up)?

ok, done venting...i'm going to go take a sledgehammer to my 40 now.
 
nuclearlemon said:
since the day i got it running the p.o.s. classic cruisers adapter has leaked. took me three years to find something that would keep oil from leaking out of the rear hubs. the power steering, which never leaked before, all of the sudden had decided to leak like a seive at the pressure hose fitting on the pump. at moab, the breather on the tranny plugged and spooged 90wt everywhere

so, i pull the top cover, knock out the breather, tap replace with pipe nipple...figure while i've got it down, i'll replace the adapter with one of woody's. now because of how far forward the tranny is, i can't jockey the f$#kin top cover back on and i've tried 1/2 drill bit, egged out 1/2" drill bit, 33/64 drill bit, and egged out the 33/64 holes and the f%$kin t case still won't go on the adapter.

give me one reason why i should get rid of this P.O.S.!!! i've got another 40 here to build that's got a few updates that should've been done to mine....should i just start on that one now and take mine out and burn it (i could use the fuel i need to drain out of my 55 to light it up)?

ok, done venting...i'm going to go take a sledgehammer to my 40 now.



First off, could someone explain what the hell a sieve is, as I've always wondered.

Second, did you ask for a reason why you should get rid of it, or shouldn't?

Lastly, if you hammer and burn it... POST PICS!!!!!!!!!


JK, Cmon. You should just put it in timeout for a while (maybe a month, with her nose in the corner) and let it think about what it has done. That oughtta straighten her up and give you time to focus on the other kids.

Good luck. :frown:
 
Yeah, been there many times before. I hate my 40 too, but I also love it. Hate it when it doesn't want to work, love it when I am cruising and it is running awesome. It's a love hate thing, always will be. The thing that keeps me from selling mine is the fact that I have put so much god damn work into it. It would feel like a waste if I sold it. Put it away for awhile and come back to it later. Don't make any rash decisions while you are upset about things. I regularly step back from mine after a major project. Won't mess with it for several months, then the next project on it. Give yourself a break from it.

Noah
 
nuclearlemon said:
give me one reason why i should get rid of this P.O.S.!!!

Because I need a 40 for my 3B.....

YES!!! I won-I found a reason!

I like the park er in the corner and let her think about what she has done scenario- that has always worked for mine.

Is one allowed to do that with a wife as well???
 
I wish leaks were my only problem :frown:

Having lots of cruisers gives you lots of headaches, so you don't have to concentrate on only one. :rolleyes:


Sieve:
seive.webp
 
HawkDriver said:
First off, could someone explain what the hell a sieve is, as I've always wondered.



Good luck. :frown:


sieves_big.jpg
 
Wrong attitude.

Look at it like this .
These are man made parts, they can't possibly be smarter than me , they are inert pieces of metal at my mercy , make it happen .

Or

drop the whole assembly out from under her and piss on the whole lot and be done with it.
 
wesintl said:
Too many chebby parts on it.... ;)

You want the 66?
tempting offer???? ;)

got it in the garage which sucks with 3lbs of air in the tires when you can't drive it...came in the house...drinking heavily, eating popcorn and watching some really horrible movie i rented. may go out and kick it just for fun.
 
Ige,

So many people love you - contemplate that when the things fawk with you.


Does "f%$kin" mean foreskin?
 
While I wish you well - I am also glad to see even the experts get flustered. I thought it was just me and my stoopid noobie-ass weekend mechanic wanna-be fawk-ups. Do you have any idea how many tools or parts broke themselves after not doing what I wanted??? :D

AndrewT
 
ok...calmer now.

a. anybody else have issues getting their t case on the adapter?
b. is it easier to get the sm465 top cover on by tilting in from driver's side or right side?
c. why the hell did they have to make that stupid long ass shift fork for reverse that won't clear anything if you just line it straight up?
d. i occasionally love this cruiser, but should i seriously consider getting rid of it? it's given me more headaches since i brought it home than any other cruiser.
 
whoa!!!!
never thought id hear the words "get rid of a cruiser" come outta your mouth.
you know just as well as me that when things are modified heavily they fight you all the time.main reason why i havent really been hot about modifying my cruiser from toyota stuff yet.
 
Back
Top Bottom